TASCAM IF-DA2
Brian Long
Introduction
The TASCAM IF-DA2 is a two-channel Dante network audio interface card designed for the TASCAM SS-R250N solid-state recorder and SS-CDR250N solid-state/CD recorder. Installing the card adds Dante audio input and output, allowing these professional recorders to exchange digital audio with compatible mixers, DSP processors, converters, interfaces, and other Dante-enabled equipment over standard Ethernet infrastructure.
Designed for broadcast, commercial audio, education, houses of worship, corporate AV, and other installed systems, the IF-DA2 provides primary and secondary Ethernet connectors that can be configured for redundant Dante networking or switched operation. Dante Controller software provides routing and configuration of network audio, including sampling frequency, bit depth, and latency settings.
Product Gallery
Features, Specifications, and Manuals
Features
- Two-Channel Dante Interface: Adds two channels of Dante network audio input and two channels of Dante network audio output to a compatible TASCAM recorder.
- Designed for SS-R250N: Provides Dante connectivity for the TASCAM SS-R250N networkable solid-state audio recorder.
- Designed for SS-CDR250N: Adds Dante network audio to the TASCAM SS-CDR250N solid-state/CD audio recorder.
- Professional Network Audio Integration: Connect compatible TASCAM recorders directly to Dante-enabled mixers, DSP processors, converters, interfaces, and other network audio equipment.
- Primary and Secondary Ethernet Ports: Dual RJ-45 connections support flexible professional Dante network configurations.
- Redundant Network Operation: Primary and secondary ports can be used with separate networks to provide Dante network redundancy.
- Switched Network Operation: The Ethernet ports can also be configured for switched operation where appropriate for the network design.
- Daisy-Chain Capability: Switched operation allows compatible Dante devices to be connected without requiring a dedicated network switch for every device.
- Gigabit Ethernet: Supports 1000BASE-T Ethernet for Dante audio transport.
- Dante Controller Support: Audio routing and interface configuration are managed using Audinate Dante Controller software.
- Configurable Sampling Frequency: Dante Controller provides access to supported sampling-frequency settings for integration with the surrounding Dante system.
- Configurable Bit Depth: Network audio bit depth can be configured to match compatible Dante equipment.
- Adjustable Dante Latency: Latency settings can be selected according to the size and topology of the network.
- Low-Latency Network Audio: Dante architecture enables professional digital audio distribution with predictable latency across properly configured Ethernet networks.
- Flexible Audio Routing: Dante Controller allows network audio transmitters and receivers to be routed without dedicated point-to-point analog or digital audio cabling.
- Installed AV Applications: Well suited to hotels, banquet facilities, education, houses of worship, conference systems, entertainment venues, and other networked AV installations.
- Broadcast Applications: Enables compatible SS-series recorders to participate directly in Dante-equipped broadcast and production environments.
- Direct Internal Expansion: Installs inside the compatible recorder, avoiding the need for a separate external Dante converter.
- Integrated Power: Receives operating power from the host recorder, so no separate external power supply is required.
- Dedicated Dante Status Indicators: Ethernet connections provide link and status indication for network setup and troubleshooting.
Specifications
| Specification | Details |
|---|---|
| Product Type | Dante network audio interface expansion card |
| Audio Input | 2 channels via Dante |
| Audio Output | 2 channels via Dante |
| Compatible TASCAM Products | SS-R250N / SS-CDR250N |
| Network Protocol | Dante |
| Ethernet Standard | 1000BASE-T |
| Network Connectors | 2 × RJ-45 |
| Port Functions | PRIMARY / SECONDARY |
| Network Modes | Redundant / Switched |
| Network Cable | Category 5e or higher STP cable recommended |
| Dante Configuration Software | Audinate Dante Controller |
| Sampling Frequency Configuration | Configurable through Dante Controller |
| Bit Depth Configuration | Configurable through Dante Controller |
| Latency Configuration | Configurable through Dante Controller |
| Selectable Latency | 1 / 2 / 5ms |
| Power Source | Supplied by compatible host recorder |
| External Power Supply Required | No |
| Installation Type | Internal expansion card |
| Operating Temperature | 5–35°C (41–95°F) |
| Supported Host — Solid-State Recorder | TASCAM SS-R250N |
| Supported Host — Solid-State/CD Recorder | TASCAM SS-CDR250N |
Manuals and Documents
- IF-DA2 Owner’s Manual - Official TASCAM manual covering installation, Dante network connections, redundant and switched configurations, Dante Controller settings, routing, sampling frequency, bit depth, and latency.
- IF-DA2 Product Specification Sheet - Official TASCAM engineering specification sheet for the IF-DA2 Dante interface card.
- SS-R250N Downloads - Current TASCAM manuals, IF-DA2 documentation, host firmware, IF-DA2 firmware, and support resources for the SS-R250N.
- SS-CDR250N Downloads - Current TASCAM manuals, IF-DA2 documentation, host firmware, IF-DA2 firmware, and support resources for the SS-CDR250N.
- TASCAM IF-DA2 Product Page - Official U.S. manufacturer product information and support resources.