Sonance IS6T

Brian Long

Introduction

Invisible Speakers are the pinnacle of the Sonance “Designed to Disappear” strategy. High frequencies are achieved with Sonance’s “Motion Flex Technology”, which consists of a “Wave Flex Drive Unit” with a bending wave diaphragm, utilizing a 1.75” (44mm) voice coil, while the low frequencies are generated by an “Air Flex” Woofer with an air pulse diaphragm driven by an 6.5” (165mm) carbon fiber woofer.

Features, Specifications, and Manuals

Features
  • 4 Ohms nominal impedance with select models for professional use (IS6T and IS8T feature Sonance Laminated Core Transformer for 4 Ohm/70v/00V tap selection)
  • 180 degree sound
  • Motion Flex Technology features acoustically isolated baffle, Air Flex Woofer and Wave Flex Drive Unit for superior detail and range
  • Sonance CDX Crossover Design - Warmth and detail at all volumes
  • Accepts up to 3mm topping compound
  • Install into drywall, select plasters, wallpaper. leather, and wood veneer applications
  • Sonance DISC Depth Identification Sensing Calibration System to measure and standardize finish and performance
  • Limited 15 Year Warranty valid on Invisible Series products purchased from an authorized Sonance dealer or distributor
Specifications
Specification Details
SKU 40198 (White)
Wave Flex Drive Unit 20in^2(127cm^2) bending wave diaphragm. 1.75in (44mm) voice coil
Air Flex Woofer 98in^2 (633cm^2) air pulse diaphragm, 6.5in (165mm) carbon fiber woofer
Frequency Response (+/- 3db) 50Hz - 30kHz
Power Handling (RMS) 100 watts RMS
Sensitivity 84dB (2.83V/1m)
Nominal Impedance (Ohms) 4 ohms
Dispersion 170 degree hemispherical up to 10kHz
Transformer Taps 70 V / 100 V: 30W, 15W and 7.5W 70 V: 3.8W
Dimensions (WxHxD) 16.1" x 16.1" x 3.15" (408.94mm x 408.94mm x 80.01mm)
Mounting Depth 3.39" (86.11mm)
Architectural Specifications
The loudspeaker shall be of the two-way type comprising a single cabinet that is designed to install flush into a ceiling or wall and be finished over with up to 1/8” (3mm) of flexible material to provide a completely invisible installation. It shall feature Motion Flex Technology, consisting of a Wave Flex Drive Unit with a 20in (127cm) bending wave diaphragm utilizing a 1.75” (44mm) voicecoil, combined with an Air Flex Woofer with a 98in (633cm) air pulse diaphragm utilizing a 6” (165mm) carbon fiber woofer. Frequency range shall be 50Hz - 30KHz (-3dB). Total power handling shall be 100 Watts RMS program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 50Hz - 30KHz shall be 84dB. The unit shall be supplied with a line matching laminated core transformer suitable for 100 volt or 70 volt with rear-mounted control allowing user selectable power taps of 30W, 15W, 7.5W and 3.8W (70V) and a 6 Ohm bypass. Protection shall be provided by two independent, self-resetting poly switches. It shall provide 170 degrees of dispersion up to 10kHz. The back can shall be constructed from metal. The speaker shall be suitable for use in air handling spaces per UL2043, NFPA90 and NFPA70 S7232 as well as UL1480A, UL Rated signaling speaker. Wire shall be terminated in an enclosed area on the rear of the back can via a knock-out with internal strain relief. It shall feature the proprietary Sonance D.I.S.C. System, allowing the installer to accurately measure the thickness of topping material over the diaphragm to ensure optimum sonic performance. External dimensions shall be 16.10” Wide x 16.10” High x 3.86” Depth (409mm x 409mm x 98mm). The total enclosure shall weigh 18.41 lbs. (8.35 kg) per unit. The loudspeaker shall be the Sonance Invisible Series IS6T. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.
Manuals and Documents