Klipsch KI-362-SMA-II
Brian Long
KI-362-SMA-II
The Klipsch KI-362-SMA-II is a three-way, 22.5° trapezoidal speaker system suited for suspended permanent install applications in small to medium sized venues. The full-range system delivers high SPL output with high intelligibility in a cost-effective solution. The KI-362-SMA-II utilizes a modified Tractrix horn geometry with a well-defined 90° x 60° coverage; to permit use at any mounting angle, the midrange and high-frequency drivers are adjustable in 45° increments, allowing the 60° or 90° projection patterns to be chosen independent of the orientation of the enclosure. All components are housed in a rugged birch plywood enclosure with aesthetically profiled edges and a durable finish.
Features
- Compact 22.5° symmetrical trapezoidal design
- 1.5" and 1" titanium midrange and high-frequency compression drivers
- User-rotatable midrange and HF module for optimized pattern control
- Internal high current full-range crossover
- 16 suspension points (4 per side) for flexible mounting and rigging bar compatibility
- 15" cast frame heavy-duty woofer
- KLIP circuit Mid and HF driver protection device
- Available in Black, White or Raw Birch finish
Specifications
| Specification | Value |
|---|---|
| Frequency Response (+/- 3 dB) | 54 Hz - 20 kHz (-10 dB @ 38 Hz) |
| Power Handling | 400 watts (42V), 1600 watts peak |
| Maximum SPL | 124 dB Continuous, 130 dB Peak |
| Sensitivity | 101 dB |
| Coverage | Horizontal: 90° +/- 30° (400 Hz - 16 kHz); Vertical: 60° +/- 20° (2.8 kHz - 20 kHz) |
| Directivity Index (DI) | 8 dB +/- 2 dB (500 Hz - 20 kHz) |
| Directivity Factor (Q) | 6.3 |
| Nominal Impedance | 8 ohms, minimum 4.4 ohms @ 106 Hz |
| Overload Protection | KLIP Overload Protection Circuit-HF |
| Crossover Frequency | 1.26 kHz and 6.8 kHz |
| Components | One K-48-ST 15" woofer; One K-53-TI 1.5" titanium compression driver on a K-703-M horn; One K-100-TI 1" titanium compression driver on a K-79-T horn |
| Input Connection | Two point barrier strip |
| Mounting Options | Sixteen 3/8"-16 flypoints |
| Bracket Mount | One attachment point for C-bracket; Top and Bottom: 3/8"-16 |
| Enclosure Material | 3/4" 7-ply birch plywood cabinet, 1" MDF motorboard |
| Height | 34.3" (87.12cm) |
| Width | 19.8" (50.29cm) front, 6.8" (17.27cm) rear |
| Depth | 16" (40.64cm) |
| Weight | 70 lbs. (31.81kg) |
| Finishes | Black, White and Raw Birch finish |