Klipsch IC-650-T
Brian Long
IC-650-T
The IC-650-T packs proven materials and wide dispersion horn technology into an installer-friendly, UL-2043 and UL-1480 certified loudspeaker with an integrated back can and multi-tap transformer. The two-way design features a 6.5" woofer and a 1" titanium diaphragm compression driver on a 3.5" round modified XT Tractrix Horn for smooth, constant-directivity response, with a Tractrix port design for deeper, fuller bass with less compression and distortion. It ships complete with a tile bridge for installation in a suspended ceiling.
Features
- Wider, shorter design to fit low ceilings; multi-tap transformer
- 70-volt, 100-volt, or 8-ohm operation selectable via front baffle switch
- Tractrix Port design for deep bass with less compression
- Wide dispersion Tractrix Horn tweeter with XT technology for clear sound in any location
- Designed to mix and match with Klipsch CA-T speakers
Specifications
| Specification | Value |
|---|---|
| Frequency response | 50-20k Hz +/- 4 dB |
| Power handling | 80 watts (18.8V) cont. |
| Sensitivity | 90dB 2.83 V/1M |
| Nominal impedance | 8 ohms, min 4.4 ohms when switch is set to 8 ohm position |
| Transformer taps | 70V: 60W, 30W, 15W, 7.5W; 100V: 60W, 30W, 15W |
| Maximum acoustic output | 106 dB @ 1M |
| Coverage Angle | 105 degrees |
| Transducers | 6.5" woofer and 1" titanium diaphragm compression driver on a 3.5" round XT modified Tractrix Horn |
| Enclosure tuning | Vented via a Tractrix port |
| Input connections | Terminal Strip |
| Thru hole width | 10" diameter |
| Overall width | 10.75" diameter |
| Overall depth | 10.938" |
| Mounting depth | 10.625" |
| Cutout dimensions | 10.125" diameter |
| Weight | 11.25 lbs. |
| Finishes | Black and White |