Klipsch KPT-902-M
Brian Long
KPT-902-M
The KPT-902-M is an entry-level 2-way mono-amp screen speaker system for medium-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 125 seats (1,400 ft² / 130 m²).
Features
- One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
- Two K-33-E woofers in the KPT-902-LF enclosure
- Mono-amp configuration with integrated passive processor (KPT-902-N2)
- Single wire run minimizes amplifier setup and maintains economy
Specifications
| Specification | Value |
|---|---|
| Frequency Response (+/- 3 dB) | 48 Hz - 20 kHz |
| Frequency Range (-10 dB) | 35 Hz - 20 kHz |
| Sensitivity (1W/1M) | 100.5 dB |
| Power Handling | 300W (36V) |
| Power Handling (Peak) | 1200W |
| Maximum SPL | 125 dB |
| Nominal Impedance | 4.5 ohm |
| Horizontal Coverage | 90° +/- 30º, 400 Hz - 18 kHz |
| Vertical Coverage | 60° +/- 30º, 450 Hz - 20 kHz |
| Directivity Index (DI) | 8 dB |
| Directivity Factor (Q) | 6.3 |
| HF Drivers | One K-70-G 1.75" compression driver on a K-603 Horn |
| LF Drivers | Two K-33-E Woofers |
| Height | 55.5" (141.0 cm) |
| Width | 27.25" (69.2 cm) |
| Depth | 17.75" (40.1 cm) |
| Weight | 155 lbs. (70.3 kg) |
| Recommended Use | Up to 125 seats (approx. 1,400 ft² / 130 m²) |
| Recommended Minimum Amplifier Power | 600W into 4 ohms |