Klipsch KPT-310-M
Brian Long
KPT-310-M
The KPT-310-M is an entry-level 2-way, mono-amp screen speaker system for smaller-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 100 seats (1,000 ft² / 93 m²).
Features
- One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
- One K-33-E woofer in the KPT-310-LF cabinet
- Mono-amp configuration with integrated passive processor (KPT-310-N2)
- Single wire run minimizes amplifier setup and maintains economy
Specifications
| Specification | Value |
|---|---|
| Frequency Response (+/- 3 dB) | 52 Hz - 20 kHz |
| Frequency Range (-10 dB) | 45 Hz - 20 kHz |
| Sensitivity (1W/1M) | 99 dB |
| Power Handling | 250W (32.5V) |
| Power Handling (Peak) | 1000W |
| Maximum SPL | 123 dB |
| Nominal Impedance | 4 ohm |
| Horizontal Coverage | 90° +/- 30º, 500 Hz - 18 kHz |
| Vertical Coverage | 60° +/- 30º, 2 kHz - 20 kHz |
| Directivity Index (DI) | 8 dB |
| Directivity Factor (Q) | 6.3 |
| HF Drivers | One K-70-G 1.75" compression driver on a K-603 Horn |
| LF Drivers | One K-33-E Woofer |
| Height | 50.5" (128.3 cm) |
| Width | 27.25" (69.2 cm) |
| Depth | 12.25" (31.1 cm) |
| Weight | 100 lbs. (45.5 kg) |
| Recommended Use | Up to 100 seats (approx. 1,000 ft² / 93 m²) |
| Recommended Minimum Amplifier Power | 500W into 4 ohms |