Screen Speaker on Synapses Technologies, LLC

Klipsch KPT-Cinema Grandeur

Thu, 20 Feb 2025 00:00:00 +0000

KPT-Cinema Grandeur

The KPT-Cinema Grandeur is a fully horn-loaded, four-way behind-the-screen cinema system built on the design of the KPT-MCM Grand. It uses state-of-the-art drivers and a redesigned low-frequency enclosure that is only 31 inches deep, making it suited for the largest and finest exhibition spaces. Highs, mids, mid-bass, and low-bass frequencies are all delivered by no-compromise, high-efficiency horns, lowering distortion and increasing dialog intelligibility. It is available as the KPT-Cinema Grandeur-Q, a quad-amp version without a passive processor.

Klipsch KPT-MCM-II-Q

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-Q

The KPT-MCM-II Grand is the first and only fully horn-loaded, THX-Approved four-way cinema system, built for larger exhibition spaces and grand auditoriums fitted with digital sound reproduction equipment. Highs, mids, mid-bass, and low-bass frequencies are all delivered by no-compromise, high-efficiency horns that lower distortion and increase dialog intelligibility. In correct multi-channel configuration, the MCM Grand yields even sound coverage to every seat in the house. The Q version is the quad-amp configuration without a passive processor.

Klipsch KPT-MCM-II-T

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-T

The four-way KPT-MCM-II is offered with a passive crossover network so it can be powered via a tri-amp configuration, reducing amplifier count, wiring lengths, and labor time in a new or retrofit application. Low frequency is handled by a KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure, with a separate single 12-inch Tractrix Horn-loaded mid-bass device and Tractrix Horn two-inch exit titanium compression driver for high frequencies.

Features

Four-way design with an added passive crossover network for tri-amplifier operation
Low frequency via KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure
Separate single 12-inch Tractrix Horn-loaded mid-bass device (KPT-305-MB)
Mid frequencies via KPT-402-MF Tractrix horn
High frequencies via KPT-Grand HF-N Tractrix Horn with built-in passive processor
Recommended for up to 600 seats (approximately 9,000 sq ft / 836 sq m)
Requires DSP equipment for tri-amp operation

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	40 Hz - 19 kHz
Frequency Range (-10 dB)	35 Hz - 20 kHz
Sensitivity	112 dB
Maximum SPL	132 dB
Horizontal Coverage	80° +/- 20º, 200 Hz - 16 kHz
Vertical Coverage	50° +/- 30º, 350 Hz - 16 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	98" (248.92 cm)
Width	67.25" (170.8 cm) front
Depth	45" (114.3 cm)
Weight	526 lbs. (241.6 kg)
System Components (HF/MF / MB / LF)	KPT-Grand HF-N (includes passive processor) / KPT-305-MB / KPT-MWM-LF
Sensitivity by driver (HF/MF / MB / LF)	107.5 dB / 102.5 dB / 112 dB
Power Handling by driver (HF/MF / MB / LF)	225W (34V) / 460W (50V) / 800W (49V)
Power Handling Peak (HF/MF / MB / LF)	900W / 1840W / 3200W
Maximum SPL by driver (HF/MF / MB / LF)	129 dB / 127 dB / 137 dB

Klipsch KPT-MCM-II-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-B

The four-way KPT-MCM-II is offered with a passive crossover network for operation in a bi-amp configuration. This behind-the-screen system can be powered with less amplification, using less wiring, and with reduced install and setup time in a new or retrofit application. Low frequency is handled by a KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure, with a separate single 12-inch Tractrix Horn-loaded mid-bass device and Tractrix Horn two-inch exit titanium compression driver for high frequencies.

Klipsch KPT-745-Q

Thu, 20 Feb 2025 00:00:00 +0000

KPT-745-Q

Following the success of the KPT-MCM-II Grand fully horn-loaded, four-way cinema system, Klipsch designed the four-way KPT-745 to deliver similar movie chills and thrills but from a much shallower footprint. Less than 24 inches deep, the KPT-745 is suited for larger theater venues with limited space behind the screen. Low-frequency punch is provided by the high-efficiency KPT-415-LF quad 15-inch bass unit, aided by a separate single 8-inch Tractrix horn-loaded mid-bass device, the KPT-305-MB. The Q version is the quad-amp configuration without a passive processor.

Klipsch KPT-745-T

Thu, 20 Feb 2025 00:00:00 +0000

KPT-745-T

The KPT-745-T is designed to generate movie chills and thrills similar to the KPT-MCM-II, but from a much shallower cabinet to accommodate limited behind-the-screen space. Low-frequency punch is provided by the high-efficiency KPT-415-LF quad 15-inch bass unit, aided by a separate single 8-inch Tractrix horn-loaded mid-bass device. This version adds a passive crossover network for tri-amp operation.

Features

Four-way, space-saving cinema system less than 24" deep
KPT-415-LF quad 15-inch high-efficiency bass unit
Separate single 8-inch Tractrix horn-loaded mid-bass device (KPT-305-MB)
Tri-amp configuration using an added passive crossover on the high-frequency section
KPT-402-MF Tractrix Horn for mid frequencies
Recommended for up to 600 seats (approximately 9,000 sq ft / 836 sq m)

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	43 Hz - 19 kHz
Frequency Range (-10 dB)	26 Hz - 20 kHz
Sensitivity	109.5 dB
Maximum SPL	131 dB
Horizontal Coverage	80° +/- 20º, 350 Hz - 16 kHz
Vertical Coverage	50° +/- 30º, 350 Hz - 16 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	114.5" (290.83 cm)
Width	41.5" (105.41 cm)
Depth	23.75" (60.33 cm)
Weight	408 lbs. (185.2 kg)
System Components (HF/MF / MB / LF)	KPT-Grand HF-N (includes passive processor) + KPT-402-MF / KPT-305-MB / KPT-415-LF
Sensitivity by driver (HF/MF / MB / LF)	107.5 dB / 102.5 dB / 109 dB
Power Handling by driver (HF/MF / MB / LF)	225W (34V) / 460W (50V) / 1600W (56V)
Power Handling Peak (HF/MF / MB / LF)	900W / 1840W / 6400W
Maximum SPL by driver (HF/MF / MB / LF)	129 dB / 127 dB / 135 dB
Maximum SPL Peak (HF/MF / MB / LF)	135 dB / 133 dB / 141 dB

Klipsch KPT-745-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-745-B

Designed to generate movie chills and thrills similar to the KPT-MCM-II, the KPT-745-B delivers that performance from a much shallower cabinet to fit a limited depth area behind a screen in a grand auditorium. Low-frequency punch is provided by the high-efficiency KPT-415-LF quad 15-inch bass unit, aided by a separate single 8-inch Tractrix horn-loaded mid-bass device. This version adds a mid/high passive processor for bi-amp configuration.

Features

Four-way, space-saving cinema system less than 24" deep
KPT-415-LF quad 15-inch high-efficiency bass unit
Separate single 8-inch Tractrix horn-loaded mid-bass device (KPT-305-MB)
Bi-amp configuration using the KPT-305/402/GRAND N2 passive network
KPT-Grand-HF extended high-frequency horn module and KPT-402-MF Tractrix horn
Recommended for up to 600 seats (approximately 9,000 sq ft / 836 sq m)

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	43 Hz - 19 kHz
Frequency Range (-10 dB)	26 Hz - 20 kHz
Sensitivity	109.5 dB
Maximum SPL	131 dB
Horizontal Coverage	80° +/- 20º, 350 Hz - 16 kHz
Vertical Coverage	50° +/- 30º, 350 Hz - 16 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	114.5" (290.83 cm)
Width	41.5" (105.41 cm)
Depth	23.75" (60.33 cm)
Weight	408 lbs. (185.2 kg)
System Components (HF/MF/MB / LF)	KPT-Grand HF-T + KPT-402-MF + KPT-305-MB (via KPT-305/402/GRAND N2 network) / KPT-415-LF
Sensitivity by driver (HF/MF/MB / LF)	107.5 dB / 109 dB
Power Handling by driver (HF/MF/MB / LF)	250W (35V) / 1600W (56V)
Power Handling Peak (HF/MF/MB / LF)	1000W / 6400W
Maximum SPL by driver (HF/MF/MB / LF)	129 dB / 135 dB
Maximum SPL Peak (HF/MF/MB / LF)	135 dB / 141 dB

Klipsch KPT-445-Q

Thu, 20 Feb 2025 00:00:00 +0000

KPT-445-Q

Klipsch designed the four-way KPT-445 to deliver the increased dynamics and detail found on the latest digital soundtracks. The KPT-445 behind-the-screen system is designed for small to medium sized auditoriums and can be operated as a quad-amp or bi-amp system. It utilizes the KPT-904-LF double 15-inch low-frequency system as a solid foundation, with the KPT-402-MF Tractrix horn and K-1133 2-inch exit, 3-inch titanium diaphragm compression driver reproducing critical mid-band dialogue frequencies. The Q version is the quad-amp configuration without a passive processor.

Klipsch KPT-445-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-445-B

Klipsch designed the four-way KPT-445 to deliver the increased dynamics and detail found on the latest digital soundtracks. The KPT-445 behind-the-screen system is designed for small to medium sized auditoriums. It utilizes the KPT-904-LF double 15-inch low-frequency system as a solid foundation, with the KPT-402-MF Tractrix horn and K-1133 2-inch exit, 3-inch titanium diaphragm compression driver reproducing critical mid-band dialogue frequencies. This version includes the KPT-445-N2 passive processor for bi-amp operation.

Klipsch KPT-435-B/M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-435-B/M

As the first full three-way passive behind-the-screen system on the market, the KPT-435-B/M affords the ultimate in audio performance for small and medium sized venues. At less than 20 inches deep, it is one of the smallest speakers in its performance category. Based on the proven KPT-904-LF dual 15-inch bass unit, it delivers powerful bass from a shallow cabinet just 17.75 inches deep. Critical dialogue range is reproduced by the KPT-335-HF/MF-N, consisting of a K-510 Tractrix Horn, 2-inch throat compression driver, and the K-703 Tractrix horn with a 1.75-inch titanium diaphragm.

Klipsch KPT-335-B/M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-335-B/M

Unlike many three-way behind-the-screen systems, the KPT-335 is only 12.25 inches deep, making it one of the most compact performers in its class. Engineered to save space and deliver superior sound to smaller sized venues, the KPT-335 is a high output single 15-inch three-way system. It features the KPT-314-LF for enhanced bass output, and the KPT-335-HF/MF, consisting of a K-510 Tractrix horn, 2-inch throat compression driver, and the K-703 Tractrix horn with a 1.75-inch titanium diaphragm, to reproduce the critical dialogue range. This version includes a passive processor for either bi-amp or mono-amp operation.

Klipsch KPT-535-T

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535-T

This THX-certified, high-performance screen and stage loudspeaker system, with its 24-inch depth, allows for more usable real estate in the auditorium. Embracing the concept of a three-way system with a direct-radiated bass cabinet in a behind-the-screen application, the KPT-535 utilizes the KPT-904-LF double 15-inch low-frequency system. The critical dialogue range is reproduced by the KPT-402-MF Tractrix horn coupled to the Klipsch K-1133 two-inch exit titanium compression driver, while high frequencies are handled by the KPT-Grand HF-T Tractrix horn. The T version is the tri-amp configuration without a passive processor.

Klipsch KPT-535/4-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535/4-B

With its high efficiency, low distortion, controlled directivity, and flat frequency response, the THX-certified KPT-535-4 behind-the-screen system delivers unbridled dynamics and intense realism for today’s most exciting soundtracks. An enhanced version of the KPT-535, this system features a KPT-415-LF quad 15-inch direct-radiating bass unit for greater output in large auditoriums, while retaining the smaller system’s 24-inch depth. The dialogue range is handled by a KPT-402-MF Tractrix horn fronting a K-1133 two-inch exit titanium compression driver, with a KPT-Grand HF Tractrix horn for treble reproduction. This version includes a passive processor for bi-amp operation.

Klipsch KPT-535/4-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535/4-M

Klipsch KPT-535-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535-B

This THX-certified, high-performance screen and stage loudspeaker system, with its 24-inch depth, allows for more usable real estate in the auditorium. Embracing the concept of a three-way system with a direct-radiated bass cabinet in a behind-the-screen application, the KPT-535 utilizes the KPT-904-LF double 15-inch low-frequency system. The critical dialogue range is reproduced by the KPT-402-MF Tractrix horn coupled to the Klipsch K-1133 two-inch exit titanium compression driver, while high frequencies are handled by the KPT-Grand HF-N Tractrix horn. This version includes a passive processor for bi-amp operation.

Klipsch KPT-535-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535-M

This THX-certified, high-performance screen and stage loudspeaker system, with its 24-inch depth, allows for more usable real estate in the auditorium. Embracing the concept of a three-way system with a direct-radiated bass cabinet in a behind-the-screen application, the KPT-535 utilizes the KPT-904-LF double 15-inch low-frequency system. The critical dialogue range is reproduced by the KPT-402-MF Tractrix horn coupled to the Klipsch K-1133 two-inch exit titanium compression driver, while high frequencies are handled by the KPT-Grand HF-T Tractrix horn. This version includes the KPT-535 N2 passive processor for mono-amp operation.

Klipsch KPT-942-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-942-B

This THX-certified, high-performance two-way screen and stage loudspeaker system is built for medium-sized auditoriums. Based on the proven KPT-904-LF dual 15-inch bass unit, the KPT-942 delivers powerful bass from a cabinet just 24 inches deep. For high output combined with excellent coverage, the system uses a KPT-402-HF Tractrix horn with a K-1132 2-inch exit titanium compression driver to reproduce mid and high frequencies. The B version is the bi-amp configuration without a passive processor.

Klipsch KPT-942-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-942-M

This THX-certified, high-performance two-way screen and stage loudspeaker system is built for medium-sized auditoriums. Based on the proven KPT-904-LF dual 15-inch bass unit, the KPT-942 delivers powerful bass from a cabinet just 24 inches deep. For high output combined with excellent coverage, the system uses a KPT-402-HF Tractrix horn with a K-1132 2-inch exit titanium compression driver to reproduce mid and high frequencies. This version includes the KPT-942-N2 passive processor for mono-amp operation.

Klipsch KI-398-RGL

Thu, 20 Feb 2025 00:00:00 +0000

KI-398-RGL

The Klipsch KI-398-RGL is a full-range 22.5-degree trapezoidal design ideally suited for use as a vertical line array in a behind-the-screen cinema system. The loudspeaker has incredible output capability, featuring a 15-inch high-excursion cast-frame woofer, a large-format 3-inch titanium compression driver, and an internal high-current full-range crossover. The KI-398-RGL utilizes a modified Tractrix horn that provides a well-defined 90 x 50 degree dispersion pattern for optimum coverage and smooth off-axis response, with maximum output of 126 dB continuous, 132 dB peak. All components are housed in a rugged birch plywood enclosure with aesthetically profiled edges and a durable finish. Side-plates are available for vertical line array configurations.

Klipsch KPT-942/4-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-942/4-B

With its high efficiency, low distortion, controlled directivity, and flat frequency response, the THX-certified KPT-942-4-B two-way cinema and stage system delivers unbridled dynamics and intense realism for today’s most exacting soundtracks. Based on the KPT-415-LF quad 15-inch bass unit, the KPT-942-4-B provides enhanced low-frequency output while retaining the 24-inch depth of smaller systems. Higher frequencies are handled by a KPT-402-HF Tractrix horn with a K-1132 2-inch exit titanium compression driver. Its high efficiency, very high output, and excellent coverage characteristics make it an outstanding, cost-effective solution for medium and large auditoriums.

Klipsch KPT-904-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-904-B

The KPT-904 is a mid-sized screen and stage loudspeaker system, especially suited for stadium seating. Higher frequencies are handled by the KPT-904-HF, which uses the KDE-75-8P 3-inch titanium diaphragm compression driver mated to the K-691 horn, while bass punch is provided by the KPT-904-LF dual 15-inch low-frequency cabinet. This advanced Tractrix horn geometry and compression driver technology create a large soundstage with well-defined imaging for a genuine, lifelike sound. The B version is the bi-amp configuration without a passive processor.

Klipsch KPT-904-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-904-M

The KPT-904-M is a 2-way, mono-amp behind-the-screen cinema loudspeaker system for mid-sized screens, especially suited for stadium seating. It includes a passive processor for single-wire, mono-amp operation and is rated for auditoriums up to approximately 200 seats (2,800 ft² / 260 m²).

Features

3-inch Titanium diaphragm compression driver (KDE-75-8P) mated to the K-691 Tractrix® horn (KPT-904-HF)
Dual 15-inch low-frequency woofer cabinet (KPT-904-LF)
Mono-amp configuration with integrated passive processor (KPT-904-N2)
Also available as KPT-904-B, a bi-amp version without the passive processor

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	45 Hz - 19 kHz
Frequency Range (-10 dB)	32 Hz - 20 kHz
Sensitivity	105 dB
Maximum SPL	127 dB
Horizontal Coverage	90° +/- 20º, 250 Hz - 14 kHz
Vertical Coverage	60° +/- 20º, 2 kHz - 19 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	55.5" (141 cm)
Width	27.25" (69.22 cm)
Depth	17.75" (45.1 cm)
Weight	156 lbs. (71 kg)
Recommended Use	Up to 200 seats (approx. 2,800 ft² / 260 m²)
Recommended Minimum Amplifier Power (Mono-Amp)	800W into 4 ohms
System Components (HF/MF)	KPT-904-HF
System Components (LF)	KPT-904-LF
System Components (Network)	KPT-904-N2

Klipsch KPT-902-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-902-M

The KPT-902-M is an entry-level 2-way mono-amp screen speaker system for medium-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 125 seats (1,400 ft² / 130 m²).

Features

One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
Two K-33-E woofers in the KPT-902-LF enclosure
Mono-amp configuration with integrated passive processor (KPT-902-N2)
Single wire run minimizes amplifier setup and maintains economy

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	48 Hz - 20 kHz
Frequency Range (-10 dB)	35 Hz - 20 kHz
Sensitivity (1W/1M)	100.5 dB
Power Handling	300W (36V)
Power Handling (Peak)	1200W
Maximum SPL	125 dB
Nominal Impedance	4.5 ohm
Horizontal Coverage	90° +/- 30º, 400 Hz - 18 kHz
Vertical Coverage	60° +/- 30º, 450 Hz - 20 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
HF Drivers	One K-70-G 1.75" compression driver on a K-603 Horn
LF Drivers	Two K-33-E Woofers
Height	55.5" (141.0 cm)
Width	27.25" (69.2 cm)
Depth	17.75" (40.1 cm)
Weight	155 lbs. (70.3 kg)
Recommended Use	Up to 125 seats (approx. 1,400 ft² / 130 m²)
Recommended Minimum Amplifier Power	600W into 4 ohms

Klipsch KPT-325-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-325-B

The KPT-325-B is a compact 2-way, bi-amp behind-the-screen cinema loudspeaker system engineered to save space at only 12.25 inches in depth, while delivering the same frequency response as the larger KPT-904 system. It couples the KPT-315-LF single 15-inch woofer enclosure with the KPT-904-HF Tractrix® horn, without a passive processor, requiring DSP for bi-amp configuration. It is rated for auditoriums up to approximately 150 seats (1,800 ft² / 167 m²).

Klipsch KPT-325-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-325-M

The KPT-325-M is a compact 2-way, mono-amp behind-the-screen cinema loudspeaker system engineered to save space at only 12.25 inches in depth, while delivering the same frequency response as the larger KPT-904 system. It couples the KPT-315-LF single 15-inch woofer enclosure with the KPT-904-HF Tractrix® horn, and includes a passive processor for mono-amp operation. It is rated for auditoriums up to approximately 150 seats (1,800 ft² / 167 m²).

Features

Single 15-inch woofer enclosure (KPT-315-LF)
KPT-904-HF Tractrix® horn with 3-inch Titanium diaphragm compression driver
Mono-amp configuration with integrated passive processor (KPT-325-N2)
Delivers the same frequency response as the KPT-904 system in a smaller footprint
Also available in bi-amp configuration (KPT-325-B)

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	50 Hz - 19 kHz
Frequency Range (-10 dB)	42 Hz - 20 kHz
Sensitivity	102.5 dB
Maximum SPL	125 dB
Horizontal Coverage	80° +/- 20º, 400 Hz - 18 kHz
Vertical Coverage	60° +/- 20º, 2 kHz - 19 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	50.5" (128.27 cm)
Width	27.25" (69.22 cm)
Depth	12.25" (31.1 cm)
Weight	101 lbs. (46 kg)
Recommended Use	Up to 150 seats (approx. 1,800 ft² / 167 m²)
Recommended Minimum Amplifier Power (Mono-Amp)	800W into 4 ohms
System Components (HF/MF)	KPT-904-HF
System Components (LF)	KPT-315-LF
System Components (Network)	KPT-325-N2

Klipsch KPT-310-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-310-M

The KPT-310-M is an entry-level 2-way, mono-amp screen speaker system for smaller-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 100 seats (1,000 ft² / 93 m²).

Features

One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
One K-33-E woofer in the KPT-310-LF cabinet
Mono-amp configuration with integrated passive processor (KPT-310-N2)
Single wire run minimizes amplifier setup and maintains economy

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	52 Hz - 20 kHz
Frequency Range (-10 dB)	45 Hz - 20 kHz
Sensitivity (1W/1M)	99 dB
Power Handling	250W (32.5V)
Power Handling (Peak)	1000W
Maximum SPL	123 dB
Nominal Impedance	4 ohm
Horizontal Coverage	90° +/- 30º, 500 Hz - 18 kHz
Vertical Coverage	60° +/- 30º, 2 kHz - 20 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
HF Drivers	One K-70-G 1.75" compression driver on a K-603 Horn
LF Drivers	One K-33-E Woofer
Height	50.5" (128.3 cm)
Width	27.25" (69.2 cm)
Depth	12.25" (31.1 cm)
Weight	100 lbs. (45.5 kg)
Recommended Use	Up to 100 seats (approx. 1,000 ft² / 93 m²)
Recommended Minimum Amplifier Power	500W into 4 ohms