Mono-Amp on Synapses Technologies, LLC

Klipsch KPT-435-B/M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-435-B/M

As the first full three-way passive behind-the-screen system on the market, the KPT-435-B/M affords the ultimate in audio performance for small and medium sized venues. At less than 20 inches deep, it is one of the smallest speakers in its performance category. Based on the proven KPT-904-LF dual 15-inch bass unit, it delivers powerful bass from a shallow cabinet just 17.75 inches deep. Critical dialogue range is reproduced by the KPT-335-HF/MF-N, consisting of a K-510 Tractrix Horn, 2-inch throat compression driver, and the K-703 Tractrix horn with a 1.75-inch titanium diaphragm.

Klipsch KPT-335-B/M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-335-B/M

Unlike many three-way behind-the-screen systems, the KPT-335 is only 12.25 inches deep, making it one of the most compact performers in its class. Engineered to save space and deliver superior sound to smaller sized venues, the KPT-335 is a high output single 15-inch three-way system. It features the KPT-314-LF for enhanced bass output, and the KPT-335-HF/MF, consisting of a K-510 Tractrix horn, 2-inch throat compression driver, and the K-703 Tractrix horn with a 1.75-inch titanium diaphragm, to reproduce the critical dialogue range. This version includes a passive processor for either bi-amp or mono-amp operation.

Klipsch KPT-535/4-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535/4-M

With its high efficiency, low distortion, controlled directivity, and flat frequency response, the THX-certified KPT-535-4 behind-the-screen system delivers unbridled dynamics and intense realism for today’s most exciting soundtracks. An enhanced version of the KPT-535, this system features a KPT-415-LF quad 15-inch direct-radiating bass unit for greater output in large auditoriums, while retaining the smaller system’s 24-inch depth. The dialogue range is handled by a KPT-402-MF Tractrix horn fronting a K-1133 two-inch exit titanium compression driver, with a KPT-Grand HF Tractrix horn for treble reproduction. This version includes a passive processor for mono-amp operation; DSP is not required, as the passive processor handles all equalization and crossover requirements.

Klipsch KPT-535-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535-M

This THX-certified, high-performance screen and stage loudspeaker system, with its 24-inch depth, allows for more usable real estate in the auditorium. Embracing the concept of a three-way system with a direct-radiated bass cabinet in a behind-the-screen application, the KPT-535 utilizes the KPT-904-LF double 15-inch low-frequency system. The critical dialogue range is reproduced by the KPT-402-MF Tractrix horn coupled to the Klipsch K-1133 two-inch exit titanium compression driver, while high frequencies are handled by the KPT-Grand HF-T Tractrix horn. This version includes the KPT-535 N2 passive processor for mono-amp operation.

Klipsch KPT-942-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-942-M

This THX-certified, high-performance two-way screen and stage loudspeaker system is built for medium-sized auditoriums. Based on the proven KPT-904-LF dual 15-inch bass unit, the KPT-942 delivers powerful bass from a cabinet just 24 inches deep. For high output combined with excellent coverage, the system uses a KPT-402-HF Tractrix horn with a K-1132 2-inch exit titanium compression driver to reproduce mid and high frequencies. This version includes the KPT-942-N2 passive processor for mono-amp operation.

Klipsch KPT-904-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-904-M

The KPT-904-M is a 2-way, mono-amp behind-the-screen cinema loudspeaker system for mid-sized screens, especially suited for stadium seating. It includes a passive processor for single-wire, mono-amp operation and is rated for auditoriums up to approximately 200 seats (2,800 ft² / 260 m²).

Features

3-inch Titanium diaphragm compression driver (KDE-75-8P) mated to the K-691 Tractrix® horn (KPT-904-HF)
Dual 15-inch low-frequency woofer cabinet (KPT-904-LF)
Mono-amp configuration with integrated passive processor (KPT-904-N2)
Also available as KPT-904-B, a bi-amp version without the passive processor

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	45 Hz - 19 kHz
Frequency Range (-10 dB)	32 Hz - 20 kHz
Sensitivity	105 dB
Maximum SPL	127 dB
Horizontal Coverage	90° +/- 20º, 250 Hz - 14 kHz
Vertical Coverage	60° +/- 20º, 2 kHz - 19 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	55.5" (141 cm)
Width	27.25" (69.22 cm)
Depth	17.75" (45.1 cm)
Weight	156 lbs. (71 kg)
Recommended Use	Up to 200 seats (approx. 2,800 ft² / 260 m²)
Recommended Minimum Amplifier Power (Mono-Amp)	800W into 4 ohms
System Components (HF/MF)	KPT-904-HF
System Components (LF)	KPT-904-LF
System Components (Network)	KPT-904-N2

Klipsch KPT-902-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-902-M

The KPT-902-M is an entry-level 2-way mono-amp screen speaker system for medium-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 125 seats (1,400 ft² / 130 m²).

Features

One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
Two K-33-E woofers in the KPT-902-LF enclosure
Mono-amp configuration with integrated passive processor (KPT-902-N2)
Single wire run minimizes amplifier setup and maintains economy

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	48 Hz - 20 kHz
Frequency Range (-10 dB)	35 Hz - 20 kHz
Sensitivity (1W/1M)	100.5 dB
Power Handling	300W (36V)
Power Handling (Peak)	1200W
Maximum SPL	125 dB
Nominal Impedance	4.5 ohm
Horizontal Coverage	90° +/- 30º, 400 Hz - 18 kHz
Vertical Coverage	60° +/- 30º, 450 Hz - 20 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
HF Drivers	One K-70-G 1.75" compression driver on a K-603 Horn
LF Drivers	Two K-33-E Woofers
Height	55.5" (141.0 cm)
Width	27.25" (69.2 cm)
Depth	17.75" (40.1 cm)
Weight	155 lbs. (70.3 kg)
Recommended Use	Up to 125 seats (approx. 1,400 ft² / 130 m²)
Recommended Minimum Amplifier Power	600W into 4 ohms

Klipsch KPT-325-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-325-M

The KPT-325-M is a compact 2-way, mono-amp behind-the-screen cinema loudspeaker system engineered to save space at only 12.25 inches in depth, while delivering the same frequency response as the larger KPT-904 system. It couples the KPT-315-LF single 15-inch woofer enclosure with the KPT-904-HF Tractrix® horn, and includes a passive processor for mono-amp operation. It is rated for auditoriums up to approximately 150 seats (1,800 ft² / 167 m²).

Features

Single 15-inch woofer enclosure (KPT-315-LF)
KPT-904-HF Tractrix® horn with 3-inch Titanium diaphragm compression driver
Mono-amp configuration with integrated passive processor (KPT-325-N2)
Delivers the same frequency response as the KPT-904 system in a smaller footprint
Also available in bi-amp configuration (KPT-325-B)

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	50 Hz - 19 kHz
Frequency Range (-10 dB)	42 Hz - 20 kHz
Sensitivity	102.5 dB
Maximum SPL	125 dB
Horizontal Coverage	80° +/- 20º, 400 Hz - 18 kHz
Vertical Coverage	60° +/- 20º, 2 kHz - 19 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	50.5" (128.27 cm)
Width	27.25" (69.22 cm)
Depth	12.25" (31.1 cm)
Weight	101 lbs. (46 kg)
Recommended Use	Up to 150 seats (approx. 1,800 ft² / 167 m²)
Recommended Minimum Amplifier Power (Mono-Amp)	800W into 4 ohms
System Components (HF/MF)	KPT-904-HF
System Components (LF)	KPT-315-LF
System Components (Network)	KPT-325-N2

Klipsch KPT-310-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-310-M

The KPT-310-M is an entry-level 2-way, mono-amp screen speaker system for smaller-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 100 seats (1,000 ft² / 93 m²).

Features

One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
One K-33-E woofer in the KPT-310-LF cabinet
Mono-amp configuration with integrated passive processor (KPT-310-N2)
Single wire run minimizes amplifier setup and maintains economy

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	52 Hz - 20 kHz
Frequency Range (-10 dB)	45 Hz - 20 kHz
Sensitivity (1W/1M)	99 dB
Power Handling	250W (32.5V)
Power Handling (Peak)	1000W
Maximum SPL	123 dB
Nominal Impedance	4 ohm
Horizontal Coverage	90° +/- 30º, 500 Hz - 18 kHz
Vertical Coverage	60° +/- 30º, 2 kHz - 20 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
HF Drivers	One K-70-G 1.75" compression driver on a K-603 Horn
LF Drivers	One K-33-E Woofer
Height	50.5" (128.3 cm)
Width	27.25" (69.2 cm)
Depth	12.25" (31.1 cm)
Weight	100 lbs. (45.5 kg)
Recommended Use	Up to 100 seats (approx. 1,000 ft² / 93 m²)
Recommended Minimum Amplifier Power	500W into 4 ohms