Live Sound on Synapses Technologies, LLC

TASCAM BO-16DX/IN

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM BO-16DX/IN is a professional 16-channel analog input breakout box that converts sixteen balanced XLR connections to two 25-pin D-sub connectors. It provides a convenient way to connect microphones, wireless receiver systems, mixing consoles, outboard equipment, and other balanced analog sources to TASCAM equipment that uses high-density D-sub analog inputs.

Designed as an ideal companion for products such as the TASCAM ML-16D and ML-32D analog/Dante converters, the BO-16DX/IN is also compatible with other equipment using the standard TASCAM D-sub pin assignment conforming to AES59-2012. Its passive design requires no power, while the rugged 1U metal chassis, removable and reversible rack ears, XLR connectivity, and upside-down-readable labeling make it equally useful in broadcast facilities, recording and post-production studios, equipment racks, mobile systems, and live production environments.

TASCAM BO-16DX/OUT

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM BO-16DX/OUT is a professional 16-channel analog output breakout box that converts two high-density 25-pin D-sub connections into sixteen individually accessible balanced XLR outputs. It provides a convenient way to connect multichannel converters, interfaces, recorders, and other D-sub-equipped equipment to mixing consoles, amplifiers, powered loudspeakers, processors, patching systems, and other professional analog audio equipment.

Designed as an ideal companion for products such as the TASCAM ML-16D and ML-32D analog/Dante converters, the BO-16DX/OUT can also be used with the SERIES 8p Dyna and other equipment using compatible TASCAM/AES59-2012 D-sub wiring. Its completely passive design requires no power, while the rugged 1U metal chassis, standard XLR connections, reversible rack ears, and upside-down-readable labeling make it well suited to broadcast, recording, post-production, live sound, mobile production, and professional AV systems.

TASCAM IF-DA64

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM IF-DA64 is a professional Dante/AES67 expansion card that adds up to 64 channels of network audio input and 64 channels of network audio output to compatible TASCAM equipment. Dual Gigabit Ethernet ports provide direct connection to Dante infrastructure while supporting redundant or switched network configurations for flexible system design.

Designed for TASCAM products equipped with compatible expansion slots, the IF-DA64 integrates multitrack recorders and digital mixing consoles into large networked audio systems without requiring conventional high-channel-count audio cabling. It is particularly useful for broadcast, live sound, recording, theater, houses of worship, and installed AV systems where Dante provides centralized routing between consoles, stage boxes, recorders, processors, and other networked equipment.

TASCAM ML-16D

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM ML-16D is a professional 16-channel analog-to-Dante and Dante-to-analog converter designed to bridge traditional balanced line-level audio equipment with modern Dante network audio systems. Sixteen analog inputs can be converted and transmitted onto a Dante network while 16 Dante channels can simultaneously be converted back to balanced analog audio, making the ML-16D well suited to installed AV, broadcast, recording, live sound, education, houses of worship, theaters, and other networked audio environments.

TASCAM ML-32D

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM ML-32D is a professional 32-channel analog-to-Dante and Dante-to-analog converter designed to integrate high-density analog audio equipment with Dante network audio systems. It converts up to 32 balanced analog line-level inputs to Dante while simultaneously converting up to 32 incoming Dante channels back to balanced analog audio, providing a straightforward bridge between conventional analog infrastructure and networked audio.

Designed for installed AV, broadcast, recording facilities, theaters, live sound, education, houses of worship, entertainment venues, and other professional environments, the ML-32D provides 64 channels of simultaneous analog I/O conversion in a compact 2U rackmount chassis. Dual Gigabit Ethernet ports support redundant Dante networking, selectable analog reference levels accommodate different professional operating standards, and Dante Controller provides centralized network routing and configuration.

TASCAM MM-2D-X

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM MM-2D-X is a compact mic/line and Dante converter with an integrated DSP mixer, designed to connect professional analog audio equipment directly to Dante network audio systems. Two balanced XLR mic/line inputs with remotely controllable microphone preamps and +48V phantom power provide high-quality analog input, while two balanced XLR line outputs connect the Dante network to amplifiers, powered loudspeakers, processors, recorders, and other professional audio equipment.

In addition to its two analog inputs and outputs, the MM-2D-X provides four-channel Dante input and output, flexible matrix routing, input and output DSP, ducking, ambient noise compensation, scene storage, AES67 compatibility, PoE operation, and software-based remote control. Its compact half-rack design and XLR connectivity make it particularly useful for live production, broadcast, recording, education, houses of worship, presentation systems, and professional AV installations where equipment may need to be connected or reconfigured without rewiring permanent Euroblock terminations.

TASCAM SB-16D

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM SB-16D is a professional 16-input/16-output Dante stage box designed for live sound, broadcast, recording, theater, houses of worship, installed AV, and other networked audio environments. Sixteen balanced XLR mic/line inputs combine TASCAM Class 1 HDIA microphone preamps with 32-bit A/D conversion, while sixteen balanced XLR line outputs provide local analog connectivity for monitors, amplifiers, processors, recording equipment, and other professional audio devices.

Designed for seamless integration with TASCAM Sonicview consoles while remaining usable as a standalone Dante interface, the SB-16D supports redundant Dante networking, AES67, SMPTE ST 2110, Dante Domain Manager, remote preamp control, and 8-in/8-out GPIO. Multiple units can be combined when more analog I/O is required, and the rugged enclosure can operate as a floor-mounted stage box or be installed in a standard 19-inch rack using the included 3U mounting hardware.

TASCAM Sonicview 16XP

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM Sonicview 16XP is a professional digital mixing console designed for live sound, broadcast, theater, installed AV, houses of worship, production facilities, and other applications that demand extensive routing and processing in a compact control surface. Its 16-channel control surface combines motorized faders with multiple color touchscreens and dedicated rotary controls, allowing engineers to view and adjust channel parameters without relying on a single central display.

At the heart of the Sonicview 16XP is a 96kHz mixing engine using 54-bit floating-point processing. The console supports 40 mono input channels, two stereo input channels, 22 configurable AUX/GROUP buses, a stereo main bus, four internal effects processors, Dante networking, 32-channel USB audio, and multitrack SD recording. Flexible expansion and remote-control capabilities make the Sonicview 16XP equally useful as a stand-alone live console or as the center of a larger networked professional audio system.

TASCAM Sonicview 24XP

Fri, 18 Sep 2026 00:00:00 +0000

Introduction

The TASCAM Sonicview 24XP is a professional digital mixing and multitrack recording console built for live sound, broadcast, theater, houses of worship, installed AV, remote production, and recording applications. Its expansive control surface combines 24 channel faders plus a master fader with three 7-inch color touchscreens, dedicated rotary controls, channel displays, and customizable user controls, giving engineers fast access to large mixes without depending on a single central display.