Invisible Speakers on Synapses Technologies, LLC

Sonance

Wed, 23 Sep 2026 00:00:00 +0000

Designed to Disappear

Sonance pioneered the architectural loudspeaker. For more than 40 years, Sonance has built speakers that deliver great sound while blending into walls, ceilings, and landscapes, so the audio is noticed and the hardware isn’t.

Professional Series

Engineered for commercial installations such as boardrooms, retail, restaurants, galleries, casinos, and education. Professional Series speakers combine class-leading sensitivity, minimalist aesthetics, 70V/100V transformer taps, and fast installation with magnetic grille retention. Available in in-ceiling, pendant, and surface-mount form factors, plus matching woofers and subwoofers.

Sonance Invisible Series

Wed, 23 Sep 2026 00:00:00 +0000

Designed to Disappear

Sonance Invisible Series speakers install beneath up to 1/8" of finish material, including plaster, drywall mud, wallpaper, leather, and wood veneer. There is no visible grille, so the finished surface looks untouched. They are a strong fit for hospitality, luxury retail, and guest-facing environments where aesthetics matter as much as sound.

Professional Models

Full-range invisible speakers in 6.5", 8", and 10" sizes. The IS6T and IS8T add 70V/100V taps for commercial distributed systems.

Sonance IS10

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

Large Invisible Series In-Wall and In-Ceiling Speaker with 10" Air Flex Woofer

Product Gallery

Features, Specifications, and Manuals

Features

6 Ohms nominal impedance with select models for professional use (IS6T and IS8T feature Sonance Laminated Core Transformer for 6 Ohm/70v/00V tap selection)
180 degree sound
Motion Flex Technology features acoustically isolated baffle, Air Flex Woofer and Wave Flex Drive Unit for superior detail and range
Sonance CDX Crossover Design - Warmth and detail at all volumes
Accepts up to 3mm topping compound
Install into drywall, select plasters, wallpaper. leather, and wood veneer applications
Sonance DISC Depth Identification Sensing Calibration System to measure and standardize finish and performance
Limited 15 Year Warranty valid on Invisible Series products purchased from an authorized Sonance dealer or distributor

Specifications

Specification	Details
SKU	93480 (White)
Wave Flex Drive Unit	29in^2 (188cm^2) bending wave diaphragm \| 1.75in (44mm) voice coil
Air Flex Woofer	244in^2 (1573cm^2) air pulse diaphragm, 10in (254mm) carbon fiber woofer
Frequency Response (+/- 3db)	35Hz - 30kHz
Power Handling (RMS)	200 watts RMS
Sensitivity	87dB (2.83V/1m)
Nominal Impedance (Ohms)	6 ohms
Dispersion	170 degree hemispherical
Dimensions (WxHxD)	16.1" x 28.66" x 3.15" (408.94mm x 727.96mm x 80.01mm)
Mounting Depth	2.68" (68.07mm)

Manuals and Documents

Invisible Series IS10 IS8 IS6 Data Sheet (PDF) - Sales & Data Sheets
Invisible Series Accessories Data Sheet (PDF) - Sales & Data Sheets
Invisible Series Brochure (PDF) - Sales & Data Sheets
Invisible Series Installation Manual (PDF) - Instructions
Invisible Series Finishing Guide 2024 (PDF) - Instructions
Sonance Invisible Series Surround Sound Configuration (PDF) - Instructions
IS10 Invisible Series 93480 cad file 2020 (PDF) - Drawings & Images
IS10 Invisible Series 93480 cad file 2020 (DXF) - Drawings & Images
IS10 Invisible Series 93480 cad file 2020 (DWG) - Drawings & Images
IS10 EASE file (GLL) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance IS10 Product Page - Official manufacturer product information, documentation, and support resources.

Sonance IS6T

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

Invisible Speakers are the pinnacle of the Sonance “Designed to Disappear” strategy. High frequencies are achieved with Sonance’s “Motion Flex Technology”, which consists of a “Wave Flex Drive Unit” with a bending wave diaphragm, utilizing a 1.75” (44mm) voice coil, while the low frequencies are generated by an “Air Flex” Woofer with an air pulse diaphragm driven by an 6.5” (165mm) carbon fiber woofer.

Product Gallery

Features, Specifications, and Manuals

Features

4 Ohms nominal impedance with select models for professional use (IS6T and IS8T feature Sonance Laminated Core Transformer for 4 Ohm/70v/00V tap selection)
180 degree sound
Motion Flex Technology features acoustically isolated baffle, Air Flex Woofer and Wave Flex Drive Unit for superior detail and range
Sonance CDX Crossover Design - Warmth and detail at all volumes
Accepts up to 3mm topping compound
Install into drywall, select plasters, wallpaper. leather, and wood veneer applications
Sonance DISC Depth Identification Sensing Calibration System to measure and standardize finish and performance
Limited 15 Year Warranty valid on Invisible Series products purchased from an authorized Sonance dealer or distributor

Specifications

Specification	Details
SKU	40198 (White)
Wave Flex Drive Unit	20in^2(127cm^2) bending wave diaphragm. 1.75in (44mm) voice coil
Air Flex Woofer	98in^2 (633cm^2) air pulse diaphragm, 6.5in (165mm) carbon fiber woofer
Frequency Response (+/- 3db)	50Hz - 30kHz
Power Handling (RMS)	100 watts RMS
Sensitivity	84dB (2.83V/1m)
Nominal Impedance (Ohms)	4 ohms
Dispersion	170 degree hemispherical up to 10kHz
Transformer Taps	70 V / 100 V: 30W, 15W and 7.5W 70 V: 3.8W
Dimensions (WxHxD)	16.1" x 16.1" x 3.15" (408.94mm x 408.94mm x 80.01mm)
Mounting Depth	3.39" (86.11mm)

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a single cabinet that is designed to install flush into a ceiling or wall and be finished over with up to 1/8” (3mm) of flexible material to provide a completely invisible installation. It shall feature Motion Flex Technology, consisting of a Wave Flex Drive Unit with a 20in (127cm) bending wave diaphragm utilizing a 1.75” (44mm) voicecoil, combined with an Air Flex Woofer with a 98in (633cm) air pulse diaphragm utilizing a 6” (165mm) carbon fiber woofer. Frequency range shall be 50Hz - 30KHz (-3dB). Total power handling shall be 100 Watts RMS program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 50Hz - 30KHz shall be 84dB. The unit shall be supplied with a line matching laminated core transformer suitable for 100 volt or 70 volt with rear-mounted control allowing user selectable power taps of 30W, 15W, 7.5W and 3.8W (70V) and a 6 Ohm bypass. Protection shall be provided by two independent, self-resetting poly switches. It shall provide 170 degrees of dispersion up to 10kHz. The back can shall be constructed from metal. The speaker shall be suitable for use in air handling spaces per UL2043, NFPA90 and NFPA70 S7232 as well as UL1480A, UL Rated signaling speaker. Wire shall be terminated in an enclosed area on the rear of the back can via a knock-out with internal strain relief. It shall feature the proprietary Sonance D.I.S.C. System, allowing the installer to accurately measure the thickness of topping material over the diaphragm to ensure optimum sonic performance. External dimensions shall be 16.10” Wide x 16.10” High x 3.86” Depth (409mm x 409mm x 98mm). The total enclosure shall weigh 18.41 lbs. (8.35 kg) per unit. The loudspeaker shall be the Sonance Invisible Series IS6T. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

IS6T Data Sheet (PDF) - Sales & Data Sheets
Invisible Series Accessories Data Sheet (PDF) - Sales & Data Sheets
Invisible Series Brochure (PDF) - Sales & Data Sheets
IS6T Manual (PDF) - Instructions
Invisible Series Finishing Guide 2024 (PDF) - Instructions
IS6T Invisible Series cad file (PDF) - Drawings & Images
IS6T Invisible Series cad file (DXF) - Drawings & Images
IS6T Invisible Series cad file (DWG) - Drawings & Images
IS6 & IS6T - Depth Disc Locations 2D Drawing (ZIP) - Drawings & Images
IS REVIT FILE (ZIP) - Drawings & Images
IS6T EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance IS6T Product Page - Official manufacturer product information, documentation, and support resources.

Sonance IS8T

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

Invisible Speakers represent the peak of Sonance’s Designed to Disappear strategy. High frequencies are delivered using Sonance Motion Flex Technology, which features a Wave Flex Drive Unit with a bending wave diaphragm and a 1.75-inch (44mm) voice coil. Low frequencies are produced by an Air Flex Woofer that uses an air pulse diaphragm powered by an 8-inch (203mm) carbon fiber woofer.

Product Gallery

Features, Specifications, and Manuals

Features

4 Ohms nominal impedance with select models for professional use (IS6T and IS8T feature Sonance Laminated Core Transformer for 4 Ohm/70v/00V tap selection)
180 degree sound
Motion Flex Technology features acoustically isolated baffle, Air Flex Woofer and Wave Flex Drive Unit for superior detail and range
Sonance CDX Crossover Design - Warmth and detail at all volumes
Accepts up to 3mm topping compound
Install into drywall, select plasters, wallpaper. leather, and wood veneer applications
Sonance DISC Depth Identification Sensing Calibration System to measure and standardize finish and performance
Limited 15 Year Warranty valid on Invisible Series products purchased from an authorized Sonance dealer or distributor

Specifications

Specification	Details
SKU	40197 (White)
Wave Flex Drive Unit	29in^2 (188cm^2) bending wave diaphragm, 1.75in (44mm) voice coil
Air Flex Woofer	191in^2 (1234cm^2) air pulse diaphragm, 8in (203mm) carbon fiber woofer
Frequency Response (+/- 3db)	40Hz - 30kHz
Power Handling (RMS)	160 watts RMS
Sensitivity	86dB (2.83V/1m)
Nominal Impedance (Ohms)	4 ohms
Dispersion	170 degree hemispherical up to 10kHz
Transformer Taps	70 V / 100 V: 60W, 30W and 15W 70 V: 7.5W
Dimensions (WxHxD)	16.1" x 24.13" x 3.86" (408.94mm x 612.9mm x 98.04mm)
Mounting Depth	3.39" (86.11mm)
Weight	25.24 lbs. (11.45kg)
Certifications	UL2043, UL1480
Attachment	Screw Terminals with strain relief
Overload Protection	Two independent self-resetting poly switches

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a single cabinet that is designed to install flush into a ceiling or wall and be finished over with up to 1/8” (3mm) of flexible material to provide a completely invisible installation. It shall feature Motion Flex Technology, consisting of a Wave Flex Drive Unit with a 29in (188cm) bending wave diaphragm utilizing a 1.75” (44mm) voicecoil, combined with an Air Flex Woofer with a 191in² (1234cm) air pulse diaphragm utilizing an 8” (203mm) carbon fiber woofer. Frequency range shall be 40Hz – 30KHz (-3dB). Total power handling shall be 160 Watts RMS program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 40Hz – 30KHz shall be 86dB. The unit shall be supplied with a line matching laminated core transformer suitable for 100 volt or 70 volt with rear-mounted control allowing user selectable power taps of 60W, 30W, 15W and 7.5W (70V) and a 6 Ohm bypass. Protection shall be provided by two independent, self-resetting poly switches. It shall provide 170 degrees of dispersion up to 10kHz. The back can shall be constructed from metal. The speaker shall be suitable for use in air handling spaces per UL2043, NFPA90 and NFPA70 S7232 as well as UL1480A, UL Rated signaling speaker. Wire shall be terminated in an enclosed area on the rear of the back can via a knock-out with internal strain relief. It shall feature the proprietary Sonance D.I.S.C. System, allowing the installer to accurately measure the thickness of topping material over the diaphragm to ensure optimum sonic performance. External dimensions shall be 16.10” Wide x 24.13” High x 3.86” Depth (409mm x 613mm x 98mm). The total enclosure shall weigh 25.24 lbs. (11.45 kg) per unit. The loudspeaker shall be the Sonance Invisible Series IS8T. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

IS8T Data Sheet (PDF) - Sales & Data Sheets
Invisible Series Accessories Data Sheet (PDF) - Sales & Data Sheets
Invisible Series Brochure (PDF) - Sales & Data Sheets
Invisible Series Finishing Guide 2024 (PDF) - Instructions
IS8T Invisible Series Manual (PDF) - Instructions
IS8T Invisible Series cad file (PDF) - Drawings & Images
IS8T Invisible Series cad file (DWG) - Drawings & Images
IS8T Invisible Series cad file (DXF) - Drawings & Images
IS REVIT FILE (ZIP) - Drawings & Images
IS8T ease file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance IS8T Product Page - Official manufacturer product information, documentation, and support resources.