Horn-Loaded on Synapses Technologies, LLC

Klipsch KPT-Cinema Grandeur

Thu, 20 Feb 2025 00:00:00 +0000

KPT-Cinema Grandeur

The KPT-Cinema Grandeur is a fully horn-loaded, four-way behind-the-screen cinema system built on the design of the KPT-MCM Grand. It uses state-of-the-art drivers and a redesigned low-frequency enclosure that is only 31 inches deep, making it suited for the largest and finest exhibition spaces. Highs, mids, mid-bass, and low-bass frequencies are all delivered by no-compromise, high-efficiency horns, lowering distortion and increasing dialog intelligibility. It is available as the KPT-Cinema Grandeur-Q, a quad-amp version without a passive processor.

Klipsch KPT-MCM-II-Q

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-Q

The KPT-MCM-II Grand is the first and only fully horn-loaded, THX-Approved four-way cinema system, built for larger exhibition spaces and grand auditoriums fitted with digital sound reproduction equipment. Highs, mids, mid-bass, and low-bass frequencies are all delivered by no-compromise, high-efficiency horns that lower distortion and increase dialog intelligibility. In correct multi-channel configuration, the MCM Grand yields even sound coverage to every seat in the house. The Q version is the quad-amp configuration without a passive processor.

Klipsch KPT-MCM-II-T

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-T

The four-way KPT-MCM-II is offered with a passive crossover network so it can be powered via a tri-amp configuration, reducing amplifier count, wiring lengths, and labor time in a new or retrofit application. Low frequency is handled by a KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure, with a separate single 12-inch Tractrix Horn-loaded mid-bass device and Tractrix Horn two-inch exit titanium compression driver for high frequencies.

Features

Four-way design with an added passive crossover network for tri-amplifier operation
Low frequency via KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure
Separate single 12-inch Tractrix Horn-loaded mid-bass device (KPT-305-MB)
Mid frequencies via KPT-402-MF Tractrix horn
High frequencies via KPT-Grand HF-N Tractrix Horn with built-in passive processor
Recommended for up to 600 seats (approximately 9,000 sq ft / 836 sq m)
Requires DSP equipment for tri-amp operation

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	40 Hz - 19 kHz
Frequency Range (-10 dB)	35 Hz - 20 kHz
Sensitivity	112 dB
Maximum SPL	132 dB
Horizontal Coverage	80° +/- 20º, 200 Hz - 16 kHz
Vertical Coverage	50° +/- 30º, 350 Hz - 16 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	98" (248.92 cm)
Width	67.25" (170.8 cm) front
Depth	45" (114.3 cm)
Weight	526 lbs. (241.6 kg)
System Components (HF/MF / MB / LF)	KPT-Grand HF-N (includes passive processor) / KPT-305-MB / KPT-MWM-LF
Sensitivity by driver (HF/MF / MB / LF)	107.5 dB / 102.5 dB / 112 dB
Power Handling by driver (HF/MF / MB / LF)	225W (34V) / 460W (50V) / 800W (49V)
Power Handling Peak (HF/MF / MB / LF)	900W / 1840W / 3200W
Maximum SPL by driver (HF/MF / MB / LF)	129 dB / 127 dB / 137 dB

Klipsch KPT-MCM-II-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-B

The four-way KPT-MCM-II is offered with a passive crossover network for operation in a bi-amp configuration. This behind-the-screen system can be powered with less amplification, using less wiring, and with reduced install and setup time in a new or retrofit application. Low frequency is handled by a KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure, with a separate single 12-inch Tractrix Horn-loaded mid-bass device and Tractrix Horn two-inch exit titanium compression driver for high frequencies.

Klipsch KPT-1802-HLS

Thu, 20 Feb 2025 00:00:00 +0000

KPT-1802-HLS

The KPT-1802-HLS is an industry-first horn-loaded subwoofer design using an 18-inch driver with a 4-inch voice coil. The patented horn-loaded vented design results in class-leading acoustic output combined with commanding 20 Hz bass response, previously unattainable from even a 21-inch driver configuration. It pairs with the Klipsch KPT-Cinema Grandeur or KPT-MCM-II for a fully horn-loaded cinema front stage.

Features

Industry-first, fully horn-loaded, vented 18-inch subwoofer cabinet
One K-473 18" woofer with 4" voice coil
130 dB continuous output capability (136 dB peak)
3/4" 7-ply plywood cabinet construction

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	26Hz-240Hz +/- 3dB (-10dB @ 21Hz)
Power Handling	1100 watts (71V); 4400 watts peak
Maximum SPL	130 dB Continuous; 136 dB Peak
Sensitivity	102 dB
Nominal Impedance	6 ohms (4.5 min. @ 100Hz)
Components	One K-473 18" woofer with 4" voice coil
Input Connection	Two point barrier strip
Enclosure Material	3/4" 7-ply plywood cabinet
Height	48" (121.9 cm)
Width	74" (188 cm)
Depth	31" (78.7 cm)
Weight	330 lbs (150 kg)
Item Number	1016560
Recommended Minimum Amplifier Power	2200 watts into 4 ohms
Recommended Highpass Crossover	25Hz Linkwitz-Riley 24dB
Recommended Lowpass Crossover	80-100Hz Linkwitz-Riley 24dB
Recommended PEQ	70Hz, Q: 6, Gain: -6dB