Cinema on Synapses Technologies, LLC

Klipsch KPT-Cinema Grandeur

Thu, 20 Feb 2025 00:00:00 +0000

KPT-Cinema Grandeur

The KPT-Cinema Grandeur is a fully horn-loaded, four-way behind-the-screen cinema system built on the design of the KPT-MCM Grand. It uses state-of-the-art drivers and a redesigned low-frequency enclosure that is only 31 inches deep, making it suited for the largest and finest exhibition spaces. Highs, mids, mid-bass, and low-bass frequencies are all delivered by no-compromise, high-efficiency horns, lowering distortion and increasing dialog intelligibility. It is available as the KPT-Cinema Grandeur-Q, a quad-amp version without a passive processor.

Klipsch KPT-MCM-II-Q

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-Q

The KPT-MCM-II Grand is the first and only fully horn-loaded, THX-Approved four-way cinema system, built for larger exhibition spaces and grand auditoriums fitted with digital sound reproduction equipment. Highs, mids, mid-bass, and low-bass frequencies are all delivered by no-compromise, high-efficiency horns that lower distortion and increase dialog intelligibility. In correct multi-channel configuration, the MCM Grand yields even sound coverage to every seat in the house. The Q version is the quad-amp configuration without a passive processor.

Klipsch KPT-MCM-II-T

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-T

The four-way KPT-MCM-II is offered with a passive crossover network so it can be powered via a tri-amp configuration, reducing amplifier count, wiring lengths, and labor time in a new or retrofit application. Low frequency is handled by a KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure, with a separate single 12-inch Tractrix Horn-loaded mid-bass device and Tractrix Horn two-inch exit titanium compression driver for high frequencies.

Features

Four-way design with an added passive crossover network for tri-amplifier operation
Low frequency via KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure
Separate single 12-inch Tractrix Horn-loaded mid-bass device (KPT-305-MB)
Mid frequencies via KPT-402-MF Tractrix horn
High frequencies via KPT-Grand HF-N Tractrix Horn with built-in passive processor
Recommended for up to 600 seats (approximately 9,000 sq ft / 836 sq m)
Requires DSP equipment for tri-amp operation

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	40 Hz - 19 kHz
Frequency Range (-10 dB)	35 Hz - 20 kHz
Sensitivity	112 dB
Maximum SPL	132 dB
Horizontal Coverage	80° +/- 20º, 200 Hz - 16 kHz
Vertical Coverage	50° +/- 30º, 350 Hz - 16 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	98" (248.92 cm)
Width	67.25" (170.8 cm) front
Depth	45" (114.3 cm)
Weight	526 lbs. (241.6 kg)
System Components (HF/MF / MB / LF)	KPT-Grand HF-N (includes passive processor) / KPT-305-MB / KPT-MWM-LF
Sensitivity by driver (HF/MF / MB / LF)	107.5 dB / 102.5 dB / 112 dB
Power Handling by driver (HF/MF / MB / LF)	225W (34V) / 460W (50V) / 800W (49V)
Power Handling Peak (HF/MF / MB / LF)	900W / 1840W / 3200W
Maximum SPL by driver (HF/MF / MB / LF)	129 dB / 127 dB / 137 dB

Klipsch KPT-MCM-II-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-MCM-II-B

The four-way KPT-MCM-II is offered with a passive crossover network for operation in a bi-amp configuration. This behind-the-screen system can be powered with less amplification, using less wiring, and with reduced install and setup time in a new or retrofit application. Low frequency is handled by a KPT-MWM-LF dual 15-inch high-efficiency horn-loaded woofer enclosure, with a separate single 12-inch Tractrix Horn-loaded mid-bass device and Tractrix Horn two-inch exit titanium compression driver for high frequencies.

Klipsch KPT-745-Q

Thu, 20 Feb 2025 00:00:00 +0000

KPT-745-Q

Following the success of the KPT-MCM-II Grand fully horn-loaded, four-way cinema system, Klipsch designed the four-way KPT-745 to deliver similar movie chills and thrills but from a much shallower footprint. Less than 24 inches deep, the KPT-745 is suited for larger theater venues with limited space behind the screen. Low-frequency punch is provided by the high-efficiency KPT-415-LF quad 15-inch bass unit, aided by a separate single 8-inch Tractrix horn-loaded mid-bass device, the KPT-305-MB. The Q version is the quad-amp configuration without a passive processor.

Klipsch KPT-745-T

Thu, 20 Feb 2025 00:00:00 +0000

KPT-745-T

The KPT-745-T is designed to generate movie chills and thrills similar to the KPT-MCM-II, but from a much shallower cabinet to accommodate limited behind-the-screen space. Low-frequency punch is provided by the high-efficiency KPT-415-LF quad 15-inch bass unit, aided by a separate single 8-inch Tractrix horn-loaded mid-bass device. This version adds a passive crossover network for tri-amp operation.

Features

Four-way, space-saving cinema system less than 24" deep
KPT-415-LF quad 15-inch high-efficiency bass unit
Separate single 8-inch Tractrix horn-loaded mid-bass device (KPT-305-MB)
Tri-amp configuration using an added passive crossover on the high-frequency section
KPT-402-MF Tractrix Horn for mid frequencies
Recommended for up to 600 seats (approximately 9,000 sq ft / 836 sq m)

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	43 Hz - 19 kHz
Frequency Range (-10 dB)	26 Hz - 20 kHz
Sensitivity	109.5 dB
Maximum SPL	131 dB
Horizontal Coverage	80° +/- 20º, 350 Hz - 16 kHz
Vertical Coverage	50° +/- 30º, 350 Hz - 16 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	114.5" (290.83 cm)
Width	41.5" (105.41 cm)
Depth	23.75" (60.33 cm)
Weight	408 lbs. (185.2 kg)
System Components (HF/MF / MB / LF)	KPT-Grand HF-N (includes passive processor) + KPT-402-MF / KPT-305-MB / KPT-415-LF
Sensitivity by driver (HF/MF / MB / LF)	107.5 dB / 102.5 dB / 109 dB
Power Handling by driver (HF/MF / MB / LF)	225W (34V) / 460W (50V) / 1600W (56V)
Power Handling Peak (HF/MF / MB / LF)	900W / 1840W / 6400W
Maximum SPL by driver (HF/MF / MB / LF)	129 dB / 127 dB / 135 dB
Maximum SPL Peak (HF/MF / MB / LF)	135 dB / 133 dB / 141 dB

Klipsch KPT-745-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-745-B

Designed to generate movie chills and thrills similar to the KPT-MCM-II, the KPT-745-B delivers that performance from a much shallower cabinet to fit a limited depth area behind a screen in a grand auditorium. Low-frequency punch is provided by the high-efficiency KPT-415-LF quad 15-inch bass unit, aided by a separate single 8-inch Tractrix horn-loaded mid-bass device. This version adds a mid/high passive processor for bi-amp configuration.

Features

Four-way, space-saving cinema system less than 24" deep
KPT-415-LF quad 15-inch high-efficiency bass unit
Separate single 8-inch Tractrix horn-loaded mid-bass device (KPT-305-MB)
Bi-amp configuration using the KPT-305/402/GRAND N2 passive network
KPT-Grand-HF extended high-frequency horn module and KPT-402-MF Tractrix horn
Recommended for up to 600 seats (approximately 9,000 sq ft / 836 sq m)

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	43 Hz - 19 kHz
Frequency Range (-10 dB)	26 Hz - 20 kHz
Sensitivity	109.5 dB
Maximum SPL	131 dB
Horizontal Coverage	80° +/- 20º, 350 Hz - 16 kHz
Vertical Coverage	50° +/- 30º, 350 Hz - 16 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	114.5" (290.83 cm)
Width	41.5" (105.41 cm)
Depth	23.75" (60.33 cm)
Weight	408 lbs. (185.2 kg)
System Components (HF/MF/MB / LF)	KPT-Grand HF-T + KPT-402-MF + KPT-305-MB (via KPT-305/402/GRAND N2 network) / KPT-415-LF
Sensitivity by driver (HF/MF/MB / LF)	107.5 dB / 109 dB
Power Handling by driver (HF/MF/MB / LF)	250W (35V) / 1600W (56V)
Power Handling Peak (HF/MF/MB / LF)	1000W / 6400W
Maximum SPL by driver (HF/MF/MB / LF)	129 dB / 135 dB
Maximum SPL Peak (HF/MF/MB / LF)	135 dB / 141 dB

Klipsch KPT-445-Q

Thu, 20 Feb 2025 00:00:00 +0000

KPT-445-Q

Klipsch designed the four-way KPT-445 to deliver the increased dynamics and detail found on the latest digital soundtracks. The KPT-445 behind-the-screen system is designed for small to medium sized auditoriums and can be operated as a quad-amp or bi-amp system. It utilizes the KPT-904-LF double 15-inch low-frequency system as a solid foundation, with the KPT-402-MF Tractrix horn and K-1133 2-inch exit, 3-inch titanium diaphragm compression driver reproducing critical mid-band dialogue frequencies. The Q version is the quad-amp configuration without a passive processor.

Klipsch KPT-445-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-445-B

Klipsch designed the four-way KPT-445 to deliver the increased dynamics and detail found on the latest digital soundtracks. The KPT-445 behind-the-screen system is designed for small to medium sized auditoriums. It utilizes the KPT-904-LF double 15-inch low-frequency system as a solid foundation, with the KPT-402-MF Tractrix horn and K-1133 2-inch exit, 3-inch titanium diaphragm compression driver reproducing critical mid-band dialogue frequencies. This version includes the KPT-445-N2 passive processor for bi-amp operation.

Klipsch KPT-435-B/M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-435-B/M

As the first full three-way passive behind-the-screen system on the market, the KPT-435-B/M affords the ultimate in audio performance for small and medium sized venues. At less than 20 inches deep, it is one of the smallest speakers in its performance category. Based on the proven KPT-904-LF dual 15-inch bass unit, it delivers powerful bass from a shallow cabinet just 17.75 inches deep. Critical dialogue range is reproduced by the KPT-335-HF/MF-N, consisting of a K-510 Tractrix Horn, 2-inch throat compression driver, and the K-703 Tractrix horn with a 1.75-inch titanium diaphragm.

Klipsch KPT-335-B/M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-335-B/M

Unlike many three-way behind-the-screen systems, the KPT-335 is only 12.25 inches deep, making it one of the most compact performers in its class. Engineered to save space and deliver superior sound to smaller sized venues, the KPT-335 is a high output single 15-inch three-way system. It features the KPT-314-LF for enhanced bass output, and the KPT-335-HF/MF, consisting of a K-510 Tractrix horn, 2-inch throat compression driver, and the K-703 Tractrix horn with a 1.75-inch titanium diaphragm, to reproduce the critical dialogue range. This version includes a passive processor for either bi-amp or mono-amp operation.

Klipsch KPT-535-T

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535-T

This THX-certified, high-performance screen and stage loudspeaker system, with its 24-inch depth, allows for more usable real estate in the auditorium. Embracing the concept of a three-way system with a direct-radiated bass cabinet in a behind-the-screen application, the KPT-535 utilizes the KPT-904-LF double 15-inch low-frequency system. The critical dialogue range is reproduced by the KPT-402-MF Tractrix horn coupled to the Klipsch K-1133 two-inch exit titanium compression driver, while high frequencies are handled by the KPT-Grand HF-T Tractrix horn. The T version is the tri-amp configuration without a passive processor.

Klipsch KPT-535/4-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535/4-B

With its high efficiency, low distortion, controlled directivity, and flat frequency response, the THX-certified KPT-535-4 behind-the-screen system delivers unbridled dynamics and intense realism for today’s most exciting soundtracks. An enhanced version of the KPT-535, this system features a KPT-415-LF quad 15-inch direct-radiating bass unit for greater output in large auditoriums, while retaining the smaller system’s 24-inch depth. The dialogue range is handled by a KPT-402-MF Tractrix horn fronting a K-1133 two-inch exit titanium compression driver, with a KPT-Grand HF Tractrix horn for treble reproduction. This version includes a passive processor for bi-amp operation.

Klipsch KPT-535/4-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535/4-M

Klipsch KPT-535-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535-B

This THX-certified, high-performance screen and stage loudspeaker system, with its 24-inch depth, allows for more usable real estate in the auditorium. Embracing the concept of a three-way system with a direct-radiated bass cabinet in a behind-the-screen application, the KPT-535 utilizes the KPT-904-LF double 15-inch low-frequency system. The critical dialogue range is reproduced by the KPT-402-MF Tractrix horn coupled to the Klipsch K-1133 two-inch exit titanium compression driver, while high frequencies are handled by the KPT-Grand HF-N Tractrix horn. This version includes a passive processor for bi-amp operation.

Klipsch KPT-535-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-535-M

This THX-certified, high-performance screen and stage loudspeaker system, with its 24-inch depth, allows for more usable real estate in the auditorium. Embracing the concept of a three-way system with a direct-radiated bass cabinet in a behind-the-screen application, the KPT-535 utilizes the KPT-904-LF double 15-inch low-frequency system. The critical dialogue range is reproduced by the KPT-402-MF Tractrix horn coupled to the Klipsch K-1133 two-inch exit titanium compression driver, while high frequencies are handled by the KPT-Grand HF-T Tractrix horn. This version includes the KPT-535 N2 passive processor for mono-amp operation.

Klipsch KPT-942-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-942-B

This THX-certified, high-performance two-way screen and stage loudspeaker system is built for medium-sized auditoriums. Based on the proven KPT-904-LF dual 15-inch bass unit, the KPT-942 delivers powerful bass from a cabinet just 24 inches deep. For high output combined with excellent coverage, the system uses a KPT-402-HF Tractrix horn with a K-1132 2-inch exit titanium compression driver to reproduce mid and high frequencies. The B version is the bi-amp configuration without a passive processor.

Klipsch KPT-942-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-942-M

This THX-certified, high-performance two-way screen and stage loudspeaker system is built for medium-sized auditoriums. Based on the proven KPT-904-LF dual 15-inch bass unit, the KPT-942 delivers powerful bass from a cabinet just 24 inches deep. For high output combined with excellent coverage, the system uses a KPT-402-HF Tractrix horn with a K-1132 2-inch exit titanium compression driver to reproduce mid and high frequencies. This version includes the KPT-942-N2 passive processor for mono-amp operation.

Klipsch KI-398-RGL

Thu, 20 Feb 2025 00:00:00 +0000

KI-398-RGL

The Klipsch KI-398-RGL is a full-range 22.5-degree trapezoidal design ideally suited for use as a vertical line array in a behind-the-screen cinema system. The loudspeaker has incredible output capability, featuring a 15-inch high-excursion cast-frame woofer, a large-format 3-inch titanium compression driver, and an internal high-current full-range crossover. The KI-398-RGL utilizes a modified Tractrix horn that provides a well-defined 90 x 50 degree dispersion pattern for optimum coverage and smooth off-axis response, with maximum output of 126 dB continuous, 132 dB peak. All components are housed in a rugged birch plywood enclosure with aesthetically profiled edges and a durable finish. Side-plates are available for vertical line array configurations.

Klipsch KPT-942/4-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-942/4-B

With its high efficiency, low distortion, controlled directivity, and flat frequency response, the THX-certified KPT-942-4-B two-way cinema and stage system delivers unbridled dynamics and intense realism for today’s most exacting soundtracks. Based on the KPT-415-LF quad 15-inch bass unit, the KPT-942-4-B provides enhanced low-frequency output while retaining the 24-inch depth of smaller systems. Higher frequencies are handled by a KPT-402-HF Tractrix horn with a K-1132 2-inch exit titanium compression driver. Its high efficiency, very high output, and excellent coverage characteristics make it an outstanding, cost-effective solution for medium and large auditoriums.

Klipsch KPT-904-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-904-B

The KPT-904 is a mid-sized screen and stage loudspeaker system, especially suited for stadium seating. Higher frequencies are handled by the KPT-904-HF, which uses the KDE-75-8P 3-inch titanium diaphragm compression driver mated to the K-691 horn, while bass punch is provided by the KPT-904-LF dual 15-inch low-frequency cabinet. This advanced Tractrix horn geometry and compression driver technology create a large soundstage with well-defined imaging for a genuine, lifelike sound. The B version is the bi-amp configuration without a passive processor.

Klipsch KPT-904-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-904-M

The KPT-904-M is a 2-way, mono-amp behind-the-screen cinema loudspeaker system for mid-sized screens, especially suited for stadium seating. It includes a passive processor for single-wire, mono-amp operation and is rated for auditoriums up to approximately 200 seats (2,800 ft² / 260 m²).

Features

3-inch Titanium diaphragm compression driver (KDE-75-8P) mated to the K-691 Tractrix® horn (KPT-904-HF)
Dual 15-inch low-frequency woofer cabinet (KPT-904-LF)
Mono-amp configuration with integrated passive processor (KPT-904-N2)
Also available as KPT-904-B, a bi-amp version without the passive processor

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	45 Hz - 19 kHz
Frequency Range (-10 dB)	32 Hz - 20 kHz
Sensitivity	105 dB
Maximum SPL	127 dB
Horizontal Coverage	90° +/- 20º, 250 Hz - 14 kHz
Vertical Coverage	60° +/- 20º, 2 kHz - 19 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	55.5" (141 cm)
Width	27.25" (69.22 cm)
Depth	17.75" (45.1 cm)
Weight	156 lbs. (71 kg)
Recommended Use	Up to 200 seats (approx. 2,800 ft² / 260 m²)
Recommended Minimum Amplifier Power (Mono-Amp)	800W into 4 ohms
System Components (HF/MF)	KPT-904-HF
System Components (LF)	KPT-904-LF
System Components (Network)	KPT-904-N2

Klipsch KPT-902-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-902-M

The KPT-902-M is an entry-level 2-way mono-amp screen speaker system for medium-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 125 seats (1,400 ft² / 130 m²).

Features

One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
Two K-33-E woofers in the KPT-902-LF enclosure
Mono-amp configuration with integrated passive processor (KPT-902-N2)
Single wire run minimizes amplifier setup and maintains economy

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	48 Hz - 20 kHz
Frequency Range (-10 dB)	35 Hz - 20 kHz
Sensitivity (1W/1M)	100.5 dB
Power Handling	300W (36V)
Power Handling (Peak)	1200W
Maximum SPL	125 dB
Nominal Impedance	4.5 ohm
Horizontal Coverage	90° +/- 30º, 400 Hz - 18 kHz
Vertical Coverage	60° +/- 30º, 450 Hz - 20 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
HF Drivers	One K-70-G 1.75" compression driver on a K-603 Horn
LF Drivers	Two K-33-E Woofers
Height	55.5" (141.0 cm)
Width	27.25" (69.2 cm)
Depth	17.75" (40.1 cm)
Weight	155 lbs. (70.3 kg)
Recommended Use	Up to 125 seats (approx. 1,400 ft² / 130 m²)
Recommended Minimum Amplifier Power	600W into 4 ohms

Klipsch KPT-325-B

Thu, 20 Feb 2025 00:00:00 +0000

KPT-325-B

The KPT-325-B is a compact 2-way, bi-amp behind-the-screen cinema loudspeaker system engineered to save space at only 12.25 inches in depth, while delivering the same frequency response as the larger KPT-904 system. It couples the KPT-315-LF single 15-inch woofer enclosure with the KPT-904-HF Tractrix® horn, without a passive processor, requiring DSP for bi-amp configuration. It is rated for auditoriums up to approximately 150 seats (1,800 ft² / 167 m²).

Klipsch KPT-325-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-325-M

The KPT-325-M is a compact 2-way, mono-amp behind-the-screen cinema loudspeaker system engineered to save space at only 12.25 inches in depth, while delivering the same frequency response as the larger KPT-904 system. It couples the KPT-315-LF single 15-inch woofer enclosure with the KPT-904-HF Tractrix® horn, and includes a passive processor for mono-amp operation. It is rated for auditoriums up to approximately 150 seats (1,800 ft² / 167 m²).

Features

Single 15-inch woofer enclosure (KPT-315-LF)
KPT-904-HF Tractrix® horn with 3-inch Titanium diaphragm compression driver
Mono-amp configuration with integrated passive processor (KPT-325-N2)
Delivers the same frequency response as the KPT-904 system in a smaller footprint
Also available in bi-amp configuration (KPT-325-B)

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	50 Hz - 19 kHz
Frequency Range (-10 dB)	42 Hz - 20 kHz
Sensitivity	102.5 dB
Maximum SPL	125 dB
Horizontal Coverage	80° +/- 20º, 400 Hz - 18 kHz
Vertical Coverage	60° +/- 20º, 2 kHz - 19 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
Height	50.5" (128.27 cm)
Width	27.25" (69.22 cm)
Depth	12.25" (31.1 cm)
Weight	101 lbs. (46 kg)
Recommended Use	Up to 150 seats (approx. 1,800 ft² / 167 m²)
Recommended Minimum Amplifier Power (Mono-Amp)	800W into 4 ohms
System Components (HF/MF)	KPT-904-HF
System Components (LF)	KPT-315-LF
System Components (Network)	KPT-325-N2

Klipsch KPT-310-M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-310-M

The KPT-310-M is an entry-level 2-way, mono-amp screen speaker system for smaller-sized auditoriums where cost effectiveness is the primary objective. The single-wire, mono-amp design minimizes amplifier setup, and a passive processor assures optimal performance between components. It is rated for auditoriums up to approximately 100 seats (1,000 ft² / 93 m²).

Features

One K-70-G 1.75-inch titanium diaphragm compression driver on a K-603 horn (KPT-310-HF)
One K-33-E woofer in the KPT-310-LF cabinet
Mono-amp configuration with integrated passive processor (KPT-310-N2)
Single wire run minimizes amplifier setup and maintains economy

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	52 Hz - 20 kHz
Frequency Range (-10 dB)	45 Hz - 20 kHz
Sensitivity (1W/1M)	99 dB
Power Handling	250W (32.5V)
Power Handling (Peak)	1000W
Maximum SPL	123 dB
Nominal Impedance	4 ohm
Horizontal Coverage	90° +/- 30º, 500 Hz - 18 kHz
Vertical Coverage	60° +/- 30º, 2 kHz - 20 kHz
Directivity Index (DI)	8 dB
Directivity Factor (Q)	6.3
HF Drivers	One K-70-G 1.75" compression driver on a K-603 Horn
LF Drivers	One K-33-E Woofer
Height	50.5" (128.3 cm)
Width	27.25" (69.2 cm)
Depth	12.25" (31.1 cm)
Weight	100 lbs. (45.5 kg)
Recommended Use	Up to 100 seats (approx. 1,000 ft² / 93 m²)
Recommended Minimum Amplifier Power	500W into 4 ohms

Klipsch KPT-1802-HLS

Thu, 20 Feb 2025 00:00:00 +0000

KPT-1802-HLS

The KPT-1802-HLS is an industry-first horn-loaded subwoofer design using an 18-inch driver with a 4-inch voice coil. The patented horn-loaded vented design results in class-leading acoustic output combined with commanding 20 Hz bass response, previously unattainable from even a 21-inch driver configuration. It pairs with the Klipsch KPT-Cinema Grandeur or KPT-MCM-II for a fully horn-loaded cinema front stage.

Features

Industry-first, fully horn-loaded, vented 18-inch subwoofer cabinet
One K-473 18" woofer with 4" voice coil
130 dB continuous output capability (136 dB peak)
3/4" 7-ply plywood cabinet construction

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	26Hz-240Hz +/- 3dB (-10dB @ 21Hz)
Power Handling	1100 watts (71V); 4400 watts peak
Maximum SPL	130 dB Continuous; 136 dB Peak
Sensitivity	102 dB
Nominal Impedance	6 ohms (4.5 min. @ 100Hz)
Components	One K-473 18" woofer with 4" voice coil
Input Connection	Two point barrier strip
Enclosure Material	3/4" 7-ply plywood cabinet
Height	48" (121.9 cm)
Width	74" (188 cm)
Depth	31" (78.7 cm)
Weight	330 lbs (150 kg)
Item Number	1016560
Recommended Minimum Amplifier Power	2200 watts into 4 ohms
Recommended Highpass Crossover	25Hz Linkwitz-Riley 24dB
Recommended Lowpass Crossover	80-100Hz Linkwitz-Riley 24dB
Recommended PEQ	70Hz, Q: 6, Gain: -6dB

Klipsch KPT-884-SW

Thu, 20 Feb 2025 00:00:00 +0000

KPT-884-SW

The low-profile KPT-884-SW high-output cinema subwoofer uses an advanced low-frequency 4-inch voice coil driver design mounted in a bass-reflex enclosure to deliver deep, driving bass. At less than 23 inches in depth, it utilizes a single 18-inch driver that gains high efficiency through large, geometrically optimized structures and a lightweight cone, capable of delivering a low frequency of 18Hz.

Features

Advanced low-frequency 4-inch voice coil driver design
Single 18-inch driver in a bass-reflex enclosure
Less than 23 inches in depth for restricted-area installation
Lightweight, geometrically optimized cone for high efficiency

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	27Hz-240Hz (9-10dB @ 18Hz)
Power Handling	1200 watts (92V)
Calc. Max. Cont. Output	128 dB
Sensitivity	98 dB
Nominal Impedance	8 ohms (7.2 min. @ 23Hz)
Transducers	One K-472-E 18" subwoofer
Input Connection	Two point barrier strip
Height	49.75" (126.4 cm)
Width	35.75" (90.8 cm)
Depth	22.5" (57.2 cm)
Weight	140 lbs (63.5 kg)
Item Number	097154011316
Recommended Minimum Amplifier Power	2400 watts into 8 ohms

Klipsch KPT-418-SW

Thu, 20 Feb 2025 00:00:00 +0000

KPT-418-SW

The low-profile KPT-418-SW high-output cinema subwoofer system uses a single 18-inch driver mounted in a bass-reflex enclosure to deliver the low-frequency effects of demanding movie soundtracks. With a depth of only 11 inches, it is more compact than other cinema subwoofers while offering greater output and placement flexibility, and can serve as the main subwoofer system in a small auditorium or as the subwoofer for surrounds in small- to medium-sized auditoriums.

Klipsch KPT-684-SW-SMA

Thu, 20 Feb 2025 00:00:00 +0000

KPT-684-SW-SMA

The KPT-684-SW is a THX®-approved cinema subwoofer that features an advanced low-frequency driver design inside a bass-reflex enclosure for smooth response to the lowest audible frequencies. It uses dual 18-inch drivers that achieve 105 dB sensitivity through large, geometrically optimized magnet structures and lightweight cones, providing back-of-house bass reinforcement without consuming seating space.

Features

Two K-47-EP2 18" woofers wired in parallel
Strong aluminum internal bracing
Four main fly points on the cabinet top
Safety fly point inserts on both sides for horizontal suspension
THX® approved design

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	34Hz-800Hz +/- 3dB (-10dB @ 25Hz)
Power Handling	600 watts (65V) per woofer; 2400 watts peak per woofer
Maximum SPL	132 dB Continuous; 138 dB Peak
Sensitivity	105 dB
Nominal Impedance	8 ohms (3.6 min. @ 22Hz), woofers wired in parallel
Components	Two K-47-EP2 18" woofers
Input Connection	Four point barrier strip
Enclosure Material	3/4" 7-ply plywood cabinet, 1" MDF motorboard
Height	48.75" (123.8 cm)
Width	23.5" (59.7 cm)
Depth	30.5" (77.5 cm)
Weight	128 lbs. (58.2 kg)
Recommended Minimum Amplifier Power	1200 watts into 8 ohms per woofer

Klipsch KPT-683-SW

Thu, 20 Feb 2025 00:00:00 +0000

KPT-683-SW

The KPT-683-SW is a high-quality cinema subwoofer that features an advanced low-frequency driver design inside a bass-reflex enclosure for smooth response to the lowest audible frequencies. It uses dual 18-inch drivers that achieve 105 dB sensitivity through large, geometrically optimized magnet structures and lightweight cones.

Features

Two K-47-EP2 18" woofers wired in parallel
Bass-reflex enclosure for smooth low-frequency response
3/4" MDF cabinet with 1" MDF motorboard
Built for durability under continuous professional use

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	34Hz-800Hz +/- 3dB (-10dB @ 25Hz)
Power Handling	600 watts (65V) per woofer; 2400 watts peak per woofer
Maximum SPL	132 dB Continuous; 138 dB Peak
Sensitivity	105 dB
Nominal Impedance	8 ohms (3.6 min. @ 22Hz), woofers wired in parallel
Components	Two K-47-EP2 18" woofers
Input Connection	Four point barrier strip
Enclosure Material	3/4" MDF cabinet, 1" MDF motorboard
Height	48.75" (123.8 cm)
Width	23.5" (59.7 cm)
Depth	30.5" (77.5 cm)
Weight	172 lbs. (78.2 kg)
Item Number	1063397
Recommended Minimum Amplifier Power	1200 watts into 8 ohms per woofer

Klipsch KPT-8-VB

Thu, 20 Feb 2025 00:00:00 +0000

KPT-8-VB

The KPT-8-VB is a cinema surround channel speaker system that brings a new level of seamless ambience and envelopment to the sound image in small- to medium-sized auditoriums. This patented Virtual Boundary Array Technology (VBAT) loudspeaker permits a 50% reduction in the required number of surround speakers typically used in a conventional surround channel array, using a pair of skewed horns in a side-by-side configuration for coverage exceeding 140° horizontally. It incorporates the standard SMPTE/ISO 2696 X-curve into its response.

Klipsch KPT-12-VB

Thu, 20 Feb 2025 00:00:00 +0000

KPT-12-VB

The KPT-12-VB is a cinema surround channel speaker system that brings a new level of seamless ambience and envelopment to the sound image in medium- to large-sized auditoriums. This patented Virtual Boundary Array Technology (VBAT) loudspeaker permits a 50% reduction in the required number of surround speakers typically used in a conventional surround channel array, using a pair of skewed horns in a side-by-side configuration for coverage exceeding 140° horizontally. It incorporates the standard SMPTE/ISO 2696 X-curve into its response.

Klipsch KPT-1200-VBM

Thu, 20 Feb 2025 00:00:00 +0000

KPT-1200-VBM

The KPT-1200-VBM utilizes Klipsch Virtual Boundary Array Technology in a strong but lightweight, high-aesthetic molded cabinet suited to contemporary cinema interiors. Its 12-inch woofer with 2-inch voice coil combines with dual, skewed-horn 1-inch titanium compression drivers for wide coverage, while tight vertical dispersion creates a long-distance throw suited to wider venues. It is a high-value option for reducing surround speaker counts when cost effectiveness is the primary objective.

Features

12-inch woofer with 2" voice coil
Two 1-inch titanium high-frequency compression drivers
Dual skewed horns with patented elliptical inserts provide even, full-frequency coverage
Built-in 8° downward angle with 15° angle option
1/4-20 UNC 2A threaded inserts accommodate optional Klipsch or industry-standard brackets

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	67 Hz – 17 kHz (–10 dB @ 44 Hz)
Power Handling	AES: 200 watts (30V), 40 Hz – 10 kHz; IEC: 250 watts (34.3V)
Maximum SPL	120.7 dB
Sensitivity	99 dB @ 2.83V; 96.7 dB @ 1W / 1M
Coverage (Horizontal)	115° +/– 25°, 800 Hz – 18 kHz
Coverage (Vertical)	50° +/– 20°, 1.6 kHz – 20 kHz
Directivity Index (DI)	8 dB +1/–1.5 dB, 1 kHz – 18 kHz
Directivity Factor (Q)	6.3
Nominal Impedance	8 ohms (minimum 4.7 ohms @ 143 Hz)
Crossover Frequency	2.1 kHz, 18 dB/Octave LF, 18 dB/Octave HF
Components	One K-28-ST 12" woofer; two K-103-TI-KP 1" titanium diaphragm compression drivers on K-707 cinema skewed horns
Input Connection	Four point barrier strip
Bracket Screw Pattern	4 screw: 2.75" (6.9 cm) x 5" (12.7 cm)
Enclosure Material	ABS + 10% glass
Grille	Powder-coated steel
Height	22.53" (57.23 cm)
Width	Top: 18.16" (46.13 cm); Bottom: 16.13" (41 cm)
Depth	Top: 10.25" (26.04 cm); Bottom: 7.125" (18.1 cm)
Weight	29 lbs (13.15 kg)
Tilt	Built-in 8° downward angle with 15° angle option
Safety Cable Insert	3/8" 1/4-20 threaded
Accessories	SB-6, SB-7, SB-9 mounting brackets

Klipsch KPT-250

Thu, 20 Feb 2025 00:00:00 +0000

KPT-250

The KPT-250 three-way cinema surround loudspeaker system brings a three-dimensional sound field to larger auditoriums, offering high power handling, extreme efficiency, extended bass response, and exceptional coverage control. Its tight vertical coverage pattern makes it well suited for use as an extra or rear surround. It employs a K-42-EPK 12-inch woofer coupled to a titanium diaphragm compression driver and a second compression driver on Tractrix® horns for accurately focused midrange and high frequencies.

Klipsch KPT-396

Thu, 20 Feb 2025 00:00:00 +0000

KPT-396

The KPT-396 cinema surround offers high power handling and sensitivity for extremely high output required by the largest-format cinemas and multi-channel surround formats. It is a full-range, 2-way surround utilizing a K-48-ST 15" low-frequency woofer and a K-691 3" diaphragm compression driver mated to a 90° x 60° K-510 horn. The enclosure is constructed from 3/4" 7-ply birch plywood with a 1" medium-density fiberboard front motorboard for reliability and freedom from cabinet-induced coloration.

Klipsch KPT-801

Thu, 20 Feb 2025 00:00:00 +0000

KPT-801

The KPT-801 is a two-way design using a high-performance 8-inch bass driver for low frequencies, paired with a Tractrix® horn offering a 90° x 90° coverage pattern attached to a 1-inch diameter compression driver for clean, efficient reproduction of high and midrange frequencies. It ships complete with a quick-install, heavy-gauge, zinc C-bracket for flexible mounting.

Features

Capable of 100 watts continuous power input
High AES sensitivity of 96 dB
Ships complete with a quick-install, heavy-gauge, zinc C-bracket
Titanium compression driver mated to a 90° x 90° Tractrix® horn
8-inch extended low-frequency driver complemented by dual ports
Designed for extended-range professional cinema surround sound in a compact cabinet with flexible mounting options

Specifications

Specification	Value
Design	2-way
Low-Frequency Driver	8-inch, dual-ported
High-Frequency Driver	Titanium compression driver on a 90° x 90° Tractrix® horn
Power Handling	100 watts continuous
Sensitivity	96 dB (AES)
Input Connection	Barrier strip
Mounting	Included zinc “C” style mounting bracket, wall or ceiling mount compatible with 3/8"-16 inserts

Note: Klipsch has not published a dedicated data sheet for the KPT-801; the specifications above are drawn from the product page and owner’s manual.

Klipsch KPT-8000M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-8000M

The KPT-8000M Cinema Surround speaker was created for smaller cinemas where cost effectiveness is a major objective. Designed for flexible side-wall or ceiling placement, its Tractrix® horn technology provides low-distortion clarity with high efficiency for maximum output per watt, and added ellipses (“mumps”) on the horn enhance full-frequency coverage across its 90° x 90° wide dispersion area. The solid, molded cabinet blends with contemporary venue interiors.

Features

8-inch woofer with 1.5" voice coil
1-inch titanium high-frequency compression driver
Patented elliptical insert 90° x 90° Tractrix® horn
Built-in 8° downward angle with 15° angle option
1/4-20 UNC 2A threaded inserts accommodate optional Klipsch or industry-standard brackets

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	75 Hz – 20 kHz (–10 dB @ 48 Hz)
Power Handling	AES: 100 watts (21V); IEC: 125 watts (23.5V)
Maximum SPL	116 dB Continuous; 122 dB Peak
Sensitivity	97.5 dB @ 2.83V / 1M; 95 dB @ 1W / 1M
Coverage (Horizontal)	90° +/– 20°, 2 kHz – 20 kHz
Coverage (Vertical)	90° +20°/–40°, 2 kHz – 20 kHz
Directivity Index (DI)	7.5 dB +/- 1 dB, 2 kHz – 20 kHz
Directivity Factor (Q)	5.6, 2 kHz – 20 kHz
Nominal Impedance	8 ohms (minimum 4.4 ohms @ 217 Hz)
Crossover Frequency	1.9 kHz, 12 dB/Octave LF, 18 dB/Octave HF
Components	One K-8-ST 8" woofer; one K-103-TI-KP 1" titanium compression driver on a K-802 horn
Input Connection	Four point barrier strip
Bracket Screw Pattern	4 screw: 2.75" (6.9 cm) x 5" (12.7 cm)
Enclosure Material	ABS + 10% glass
Grille	Powder-coated steel
Height	18.7" (47.5 cm)
Width	Top: 14.7" (37.3 cm); Bottom: 13" (33 cm)
Depth	Top: 7.2" (18.3 cm); Bottom: 4.7" (11.9 cm)
Weight	15.77 lbs (7.15 kg)
Tilt	Built-in 8° downward angle with 15° angle option
Safety Cable Insert	3/8" 1/4-20 threaded
Accessories	SB-6, SB-7, SB-9 mounting brackets

Klipsch KPT-8060H

Thu, 20 Feb 2025 00:00:00 +0000

KPT-8060H

The KPT-8060H is designed for high levels of visual and sonic appeal, suited for sidewall, rear, or ceiling placement surround speaker applications. Its Tractrix® horn technology efficiently reproduces sound with low-distortion clarity, and the 90° x 60° horn coverage pattern provides tight coverage that can extend the full width of a large auditorium. The solid, molded cabinet includes pre-drilled holes with inserts for industry-standard mounting brackets.

Features

8-inch woofer with 2" voice coil
1-inch titanium high-frequency compression driver
Patented elliptical insert 90° x 60° Tractrix® horn
Built-in 8° downward angle with 15° angle option
1/4-20 UNC 2A threaded inserts accommodate optional Klipsch or industry-standard brackets

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	75 Hz – 20 kHz (–10 dB @ 49 Hz)
Power Handling	AES: 112 watts (30V), 40 Hz – 10 kHz; IEC: 190 watts (33.5V)
Maximum SPL	121.3 dB Continuous; 127.3 dB Peak
Sensitivity	98.5 dB @ 2.83V
Coverage (Horizontal)	90° +/– 20°, 2 kHz – 18 kHz
Coverage (Vertical)	60° +20°/–15°, 1.6 kHz – 20 kHz
Directivity Index (DI)	8 dB +/- 1 dB, 2.2 kHz – 20 kHz
Directivity Factor (Q)	6.3, 2 kHz – 20 kHz
Nominal Impedance	8 ohms, minimum 4.5 ohms @ 230 Hz
Crossover Frequency	1.77 kHz, 12 dB/Octave LF, 18 dB/Octave HF
Components	One K-81-ST 8" woofer; one K-103-TI 1" titanium compression driver on a K-702 horn
Input Connection	Four point barrier strip
Bracket Screw Pattern	4 screw: 2.75" (6.9 cm) x 5" (12.7 cm)
Enclosure Material	ABS + 10% glass
Grille	Powder-coated steel
Height	18.7" (47.5 cm)
Width	Top: 14.7" (37.3 cm); Bottom: 13" (33 cm)
Depth	Top: 7.2" (18.3 cm); Bottom: 4.7" (11.9 cm)
Weight	20 lbs (9.07 kg)
Tilt	Built-in 8° downward angle with 15° angle option
Safety Cable Insert	3/8" 1/4-20 threaded
Accessories	SB-6, SB-7, SB-9 mounting brackets

Klipsch KPT-1200M

Thu, 20 Feb 2025 00:00:00 +0000

KPT-1200M

The KPT-1200M is a solid, high-style, lightweight surround speaker equally suited for on-wall or ceiling-mount applications in medium to large venues, and like all Klipsch Cinema Surround speakers, it timbre-matches Klipsch behind-screen systems. Exclusive Tractrix® horns with added ellipses enhance full-frequency dispersion while delivering high efficiency and low-distortion clarity, making it well suited to the newest immersive digital surround sound formats.

Features

12" (30.48 cm) woofer with a 2" (5.08 cm) voice coil
1.75" (4.45 cm) titanium high-frequency compression driver
90° x 90° Tractrix® horn with patented elliptical inserts
Built-in 8° downward angle with 15° angle option
1/4-20 UNC 2A threaded inserts to accommodate optional Klipsch or industry-standard brackets

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	66 Hz – 20 kHz (–10 dB @ 47 Hz)
Power Handling	AES: 113 watts (30V), 40 Hz – 10 kHz; IEC: 200 watts (40V)
Maximum SPL	122 dB; 128 dB peak
Sensitivity	99 dB @ 2.83V
Coverage (Horizontal)	90° +20º/–15º, 1 kHz – 20 kHz
Coverage (Vertical)	90° +10º/–45º, 2 kHz – 20 kHz
Directivity Index (DI)	8 dB +/- 1 dB, 1 kHz – 20 kHz
Directivity Factor (Q)	6.3
Nominal Impedance	8 ohms, minimum 4.4 ohms @ 147 Hz
Crossover Frequency	2 kHz
Components	One K-28-ST 12" woofer; one K-70-G 1.75" titanium compression driver on a K-801-M horn
Input Connection	Four point barrier strip
Mounting Options	2 screw: 1/4" x 20 machine screw for SB-102 bracket
Enclosure Material	10% glass injected ABS cabinet
Grille	Powder-coated steel
Height	22.5" (57.2 cm)
Width	Top: 18.2" (46.2 cm); Bottom: 16" (40.6 cm)
Depth	Top: 10.2" (25.9 cm); Bottom: 7.3" (18.5 cm)
Weight	33 lbs. (14.97 kg)
Tilt	Built-in 8° downward angle with 15° angle option
Safety Cable Insert	3/8" 1/4-20 threaded
Accessories	SB-6, SB-7, SB-9 mounting brackets

Klipsch KPT-1260H

Thu, 20 Feb 2025 00:00:00 +0000

KPT-1260H

The KPT-1260H Molded Cinema Surround Speaker is built for today’s largest venues, combining the high design factor of a sleek, lightweight molded cabinet with a high-output 12-inch woofer featuring a large 3" voice coil. Its exclusive 90° x 60° Tractrix® horn projects low-distortion, highly detailed surround effects to even the widest auditoriums, and like all Klipsch Cinema Surround speakers, it timbre-matches Klipsch behind-screen systems.

Features

12-inch woofer with large 3" voice coil
1.75-inch titanium high-frequency compression driver
Patented elliptical insert 90° x 60° Tractrix® horn
Built-in 8° downward angle with 15° angle option
1/4-20 UNC 2A threaded inserts accommodate optional Klipsch or industry-standard brackets

Specifications

Specification	Value
Frequency Response (+/- 3 dB)	65 Hz – 20 kHz (–10 dB @ 45 Hz)
Power Handling	AES: 300 watts (40V), 40 Hz – 10 kHz; IEC: 430 watts (49V)
Maximum SPL	126.8 dB Continuous; 132.8 dB Peak
Sensitivity	102 dB @ 2.83V
Coverage (Horizontal)	90° +/– 20°, 2 kHz – 20 kHz
Coverage (Vertical)	60° +30°/–20°, 1.2 kHz – 20 kHz
Directivity Index (DI)	9 dB +1/–2 dB, 2 kHz – 20 kHz
Directivity Factor (Q)	7.9
Nominal Impedance	8 ohms (minimum 4.4 ohms @ 174 Hz)
Crossover Frequency	1.5 kHz, 12 dB/Octave LF, 18 dB/Octave HF
Components	One K-281-ST 12" woofer; one K-70-G 1.75" titanium compression driver on a K-703-M horn
Input Connection	Four point barrier strip
Bracket Screw Pattern	4 screw: 2.75" (6.9 cm) x 5" (12.7 cm)
Enclosure Material	ABS + 10% glass
Grille	Powder-coated steel
Height	22.53" (57.23 cm)
Width	Top: 18.16" (46.13 cm); Bottom: 16.13" (41 cm)
Depth	Top: 10.25" (26.04 cm); Bottom: 7.125" (18.1 cm)
Weight	41 lbs (18.6 kg)
Tilt	Built-in 8° downward angle with 15° angle option
Safety Cable Insert	3/8" 1/4-20 threaded
Accessories	SB-6, SB-7, SB-9 mounting brackets

Klipsch KPT-1201-T2

Thu, 20 Feb 2025 00:00:00 +0000

KPT-1201-T2

The KPT-1201 is a THX®-Certified cinema surround speaker system that brings enveloping ambient sound fields and directional effects to medium and large-sized venues. It offers extended bass response, controlled coverage, and standard SMPTE/ISO 2696 X-curve de-emphasis from an enclosure designed not to be bulky, employing a 12-inch woofer and 1.75-inch titanium high-frequency compression driver coupled to a 100° x 100° Tractrix® horn.

Features

12-inch woofer (K-28-EP)
1.75-inch titanium diaphragm compression driver on a K-801 100° x 100° Tractrix® horn
15-degree down-firing angle baffle
Built-in high-frequency protection circuit
Pre-drilled holes fitting industry-standard mounting brackets
THX® Certified

Specifications

Specification	Value
Frequency Response	72Hz-17kHz ± 3dB, 46Hz-20kHz -10dB
Power Handling	200 watts (31V), 40Hz-10kHz
Calc. Max. Cont. Output	120 dB
Sensitivity	99 dB
Coverage (Horizontal)	100° +30°/-45°, 600Hz-18kHz
Coverage (Vertical)	100° +30°/-55°, 700Hz-18kHz
Directivity Index (DI)	7 dB ± 2 dB, 400Hz-18kHz
Directivity Factor (Q)	5
Nominal Impedance	8 ohms (4.76 min @ 155Hz)
Transducers	One K-28-EP 12" woofer; one K-68-A 1.75" titanium diaphragm compression driver on a K-801 horn
Input Connectors	Five-way binding posts
Height	22.7" (58 cm)
Width	17.2" (44 cm)
Depth	13.3" (34 cm) top; 5" (13 cm) bottom
Weight	42 lbs. (19 kg)

Klipsch Cinema

Thu, 20 Feb 2025 00:00:00 +0000

Theater-Grade Sound, Behind Every Screen

Klipsch’s KPT Cinema series brings professional, THX-certified sound to commercial movie theaters and custom cinema rooms. Behind-the-screen speakers, surrounds, and subwoofers are engineered to work together as a complete system, scaling from single-screen installs to large-format auditoriums.

Highlights

THX Certification on key models for verified cinema-grade performance.
Multiple screen positions — screen-mounted, in-wall, and surround configurations.
Scalable from single-screen rooms to large-format auditoriums.
Professional mounting hardware and brackets available for diverse installation requirements.

Applications

Commercial movie theaters
Custom home cinema rooms
Professional AV installation environments

Related: Klipsch DSP Amplifiers