Sonance Professional Series In-Ceiling Speakers on Synapses Technologies, LLC

Sonance PS-C41RT

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C41RT In-Ceiling Speaker features a magnetically secured, bezel-less grille for easy installation and painting. Optional black and square grille adapters allow for customizable aesthetics. With a 4" polypropylene woofer for deep bass and a 0.75" soft dome tweeter for clear highs, it ensures exceptional audio performance.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	45165 (White)
HF Driver	0.75" (19mm) Cloth Dome, Ferrofluid Cooled
LF Driver	4" (100mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	70Hz-25khz
Frequency Response (+/- 3db)	95Hz - 20kHz
Power Handling (RMS)	60W program, 30W pink noise
Sensitivity	87dB (2.83V/1m)
Rated Maximum SPL	102dB @ 1 meter (3.3 feet), 108dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 25W, 12.5W, 6.3W 70 V: 3.2W
Dimensions (Diameter x D)	6.3" x 6.5" (160.02mm x 165.1mm)
Cut-Out Dimensions (Diameter)	5.875" (149.23mm)
Knockout	Side mounted 0.75" (19mm)
Weight	5 lbs. (2.27kg)
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL1480A; UL2043; EN 54; NFPA90A; NFPA70; CSA-C22.2 No.205; CSA C22.1
Suspension Points	One, on top surface
Maximum SPL (Peak)	108dB peak

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a single flush mount enclosure containing one 4” (100mm) polypropylene cone, butyl rubber surround low frequency transducer and one coaxially mounted .75” (19mm) cloth dome, ferrofluid cooled high frequency transducer. It shall utilize a one-piece bezel-less grille design and an optional square grille adapter shall also be available if required. Frequency range shall be 95Hz – 20KHz (-3dB). Total power handling shall be 30 Watts continuous pink noise and 60 Watts program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 95Hz – 20KHz shall be 87dB. The unit shall be supplied with a laminated core line matching transformer suitable for 100 volt or 70 volt with a front mounted control allowing user selectable power taps of 25W, 12.5W, 6.25W and 3.125W (70V) and an 8 Ohm bypass. The back shall be constructed from Flame retardant polypropylene/glass fiber blend. The baffle shall be ported, and injection molded using fire rated Flame retardant polypropylene/glass fiber blend that meets UL94V-0. The speaker shall be suitable for use in air handling spaces per UL1480A, UL2043, NFPA90A, NFPA70, CSA-C22.2 No.205 and CSA C22.1. Wire shall be terminated in an enclosed area on the rear of the back can with a knock-out. Strain relief shall be provided for wire. A seismic attachment shall be provided on the rear of the back can, to allow additional support when necessary. The system shall include a support backing plate to reinforce the ceiling material and tile support rails which can all be installed from beneath the ceiling tile. External dimensions shall be 6.30” Diameter x 6.5” Depth (160mm x 165mm). The total enclosure shall weigh 5 lbs. (2.27 kg) per unit. It shall have a relatively flat frequency response and accurate sonic performance to deliver both good intelligibility and musicality. The loudspeaker shall be the Sonance Professional Series PS-C41RT. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C41RT Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
PS-C41RT PS-C61RT Manual (PDF) - Instructions
PS-C41RT PS-C61RT QuickStartGuide (PDF) - Instructions
PS-C41RT WHITE 45165 cad file 9192022 (PDF) - Drawings & Images
PS-C4 C-BRACKET & TILE BRIDGE cad file (PDF) - Drawings & Images
PS-C41RT WHITE 45165 cad file 9192022 (DWG) - Drawings & Images
PS-C41RT WHITE 45165 cad file 9192022 (DXF) - Drawings & Images
PS-C4 C-BRACKET & TILE BRIDGE cad file (DXF) - Drawings & Images
PS-C4 C-BRACKET & TILE BRIDGE cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C41RT EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C41RT Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C43RT

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C43RT in-ceiling speaker features a bezel-less magnetic grille, optional square adapter, high-excursion woofer, and pivoting tweeter for precise sound coverage. Its sealed metal enclosure includes cable clamping, a removable Euroblock connector, and seismic attachment. UL 1480 and UL 2043 certifications ensure safety and reliability in installations.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	45130 (White)
HF Driver	1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
LF Driver	4" (100mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	57Hz - 25kHz
Frequency Response (+/- 3db)	75Hz - 20kHz
Power Handling (RMS)	60W program, 30W pink noise
Sensitivity	87dB (2.83V/1m)
Rated Maximum SPL	105dB @ 1 meter (3.3 feet), 110dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 30W, 15W and 7.5W 70 V: 3.8W
Dimensions (Diameter x D)	6.3" x 7.01" (160.02mm x 178.05mm)
Cut-Out Dimensions (Diameter)	5.875" (149.23mm)
Knockout	One, Side mounted 0.75" (19mm)
Weight	5.63 lbs. (2.55kg)
Grille	One Piece Paintable Grille with Magnetic Retention
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480; UL 2043; NFPA 90A; NFPA 70
Suspension Points	One, on top surface
Maximum SPL (Peak)	110dB peak

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a single flush mount enclosure containing one 4” (100mm) polypropylene cone, butyl rubber surround low frequency transducer and one coaxially mounted 1” (25mm) cloth dome, pivoting, ferrofluid cooled high frequency transducer. It shall utilize a one-piece bezel-less grille design and an optional square grille adapter shall also be available if required. Frequency range shall be 75Hz – 20KHz (-3dB). Total power handling shall be 30 Watts continuous pink noise and 60 Watts program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 75Hz – 20KHz shall be 87dB. The unit shall be supplied with a line matching transformer suitable for 100 volt or 70 volt with a front mounted control allowing user selectable power taps of 30W, 15W, 7.5W and 3.8W (70V) and an 8 Ohm bypass. The back shall be constructed from deep drawn steel. The baffle shall be ported and injection molded using fire rated ABS that meets UL 94V-0. The speaker shall be suitable for use in air handling spaces per UL 2043, NFPA 90 and NFPA 70 S7232 as well as UL 1480, UL Rated signaling speaker. Wire shall be terminated in an enclosed area on the rear of the back can with a secondary knock-out. Strain relief shall be provided for wire. A seismic attachment shall be provided on the rear of the back can to allow additional support when necessary. The system shall include a support backing plate to reinforce the ceiling material and tile support rails which can all be installed from beneath the ceiling tile. External dimensions shall be 6.3” Diameter x 7.01” Depth (160mm x 178mm). The total enclosure shall weigh 3 lbs. (1.36 kg) per unit. It shall share consistent voicing with other form factors and sizes within its product family so as to provide continuity of sonic signature when combined within a project. The loudspeaker shall be the Sonance Professional Series PS-C43RT. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C43RT Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
Professional Series In-Ceiling Manual (PDF) - Instructions
Retro Ring In-Ceiling Installation Manual (PDF) - Instructions
PS-Ceiling QuickStartGuidel (PDF) - Instructions
PS-C4 C-BRACKET & TILE BRIDGE cad file (PDF) - Drawings & Images
PS-C43RT cad file (PDF) - Drawings & Images
PS-C4 C-BRACKET & TILE BRIDGE cad file (DXF) - Drawings & Images
PS-C4 C-BRACKET & TILE BRIDGE cad file (DWG) - Drawings & Images
PS-C43RT cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C43RT EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C43RT Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C43RTLP

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C43RTLP Low Profile In-Ceiling Speaker is designed for tight spaces, fitting beneath HVAC ducts or in 2’x4’ stud bays. Its shallow 3.43" design features a magnetically secured bezel-less grille for easy painting. With a 4" woofer and pivoting 1" tweeter, it delivers exceptional audio performance.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	45181 (White)
HF Driver	1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
LF Driver	4" (100mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	57Hz - 25kHz
Frequency Response (+/- 3db)	75Hz - 20kHz
Power Handling (RMS)	60W program, 30W pink noise
Sensitivity	87dB (2.83V/1m)
Rated Maximum SPL	105dB @ 1 meter (3.3 feet), 110dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 30W, 15W and 7.5W 70 V: 3.8W
Dimensions (Diameter x D)	9.13" x 3.43" (231.9mm x 87.12mm)
Cut-Out Dimensions (Diameter)	8.25" (209.55mm)
Knockout	One, Side mounted 0.75" (19mm)
Weight	6.00 lbs. (2.72kg)
Grille	One Piece Paintable Grille with Magnetic Retention
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480; UL 2043; NFPA 90A; NFPA 70
Suspension Points	One, on top surface
Maximum SPL (Peak)	110dB peak

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a single flush mount enclosure containing one 4” (100mm) polypropylene cone, butyl rubber surround low frequency transducer and one coaxially mounted 1” (25mm) cloth dome, pivoting, ferrofluid cooled high frequency transducer. It shall utilize a one-piece bezel-less grille design and an optional square grille adapter shall also be available if required. Frequency range shall be 75Hz – 20KHz (-3dB). Total power handling shall be 30 Watts continuous pink noise and 60 Watts program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 75Hz – 20KHz shall be 87dB. The unit shall be supplied with a line matching transformer suitable for 100 volt or 70 volt with a front mounted control allowing user selectable power taps of 30W, 15W, 7.5W and 3.8W (70V) and an 8 Ohm bypass. The back shall be constructed from deep drawn steel. The baffle shall be ported and injection molded using fire rated ABS that meets UL 94V-0. The speaker shall be suitable for use in air handling spaces per UL 2043, NFPA 90 and NFPA 70 S7232 as well as UL 1480, UL Rated signaling speaker. Wire shall be terminated on the rear of the back can with access via the rear or side knock-out. A seismic attachment shall be provided on the rear of the back can to allow additional support when necessary. The system shall include a support backing plate to reinforce the ceiling material and tile support rails which can all be installed from beneath the ceiling tile. External dimensions shall be 9.13” Diameter x 3.43” Depth (232mm x 87mm). The total enclosure shall weigh 3 lbs. (1.36 kg) per unit. It shall share consistent voicing with other form factors and sizes within its product family so as to provide continuity of sonic signature when combined within a project. The loudspeaker shall be the Sonance Professional Series PS-C43RTLP. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C43RTLP Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
Professional Series In-Ceiling Manual (PDF) - Instructions
Retro Ring In-Ceiling Installation Manual (PDF) - Instructions
PS-Ceiling QuickStartGuidel (PDF) - Instructions
PS-C6 C-BRACKET & TILE BRIDGE cad file (PDF) - Drawings & Images
PS-C43RTLP cad file (PDF) - Drawings & Images
PS-C6 C-BRACKET & TILE BRIDGE cad file (DWG) - Drawings & Images
PS-C6 C-BRACKET & TILE BRIDGE cad file (DXF) - Drawings & Images
PS-C43RTLP cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C43RTLP EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C43RTLP Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C61RT

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C61RT In-Ceiling Speaker features a bezel-less, magnetically secured grille for easy installation. It includes a 6.5" woofer for deep bass and a .75" tweeter for clear highs. With a UL94V-0 enclosure, integrated cable management, and multiple certifications, it ensures safety and seamless aesthetic integration.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	45166 (White)
HF Driver	0.75" (19mm) Cloth Dome, Ferrofluid Cooled
LF Driver	6.5" (165mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	60Hz-25khz
Frequency Response (+/- 3db)	83Hz - 20kHz
Power Handling (RMS)	100W program, 50W pink noise
Sensitivity	91dB (2.83V/1m)
Rated Maximum SPL	108dB @ 1 meter (3.3 feet), 116dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 32W, 16W and 8W 70 V: 4W
Dimensions (Diameter x D)	9.13" x 8.86" (231.9mm x 225.04mm)
Cut-Out Dimensions (Diameter)	8.25" (209.55mm)
Knockout	One, Side mounted 0.75" (19mm)
Weight	6.88 lbs. (3.12kg)
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL1480A; UL2043; EN 54; NFPA90A; NFPA70; CSA-C22.2 No.205; CSA C22.1
Suspension Points	One, on top surface
Maximum SPL (Peak)	116dB peak

Architectural Specifications

The loudspeaker shall be of the two way type comprising a single flush mount enclosure containing one 6.5” (165mm) Polypropylene Cone, Butyl Rubber Surround low frequency transducer and one coaxially mounted pivoting 1” (25mm) Cloth dome, Pivoting, Ferrofluid cooled high frequency transducer. It shall utilize a one-piece bezel-less grille design and an optional square grille adapter shall also be available if required. Frequency range shall be 65Hz – 20KHz (-3dB). Total power handling shall be 60 Watts continuous pink noise and 120 Watts program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 65Hz – 20KHz shall be 91dB. The unit shall be supplied with a line matching transformer suitable for 100 volt or 70 volt with a front mounted control allowing user selectable power taps of 60W, 30W, 15W, 7.5W and a 8 Ohm bypass. The back shall be constructed from deep drawn steel. The baffle shall be ported and injection molded using fire rated ABS that meets UL 94V-0. The speaker shall be suitable for use in air handling spaces per UL 1480, UL 2043, NFPA 90 and NFPA 70 S7232 UL Listed signaling speaker. Wire shall be terminated in an enclosed area on the rear of the back can with a secondary knock-out. Strain relief shall be provided for wire. A seismic attachment shall be provided on the rear of the back can to allow additional support when necessary. The system shall include a support backing plate to reinforce the ceiling material and tile support rails which can all be installed from beneath the ceiling tile. External dimensions shall be 9.13” Diameter x 8.86” Depth (232mm x 225mm). The total enclosure shall weigh 5 lbs. (2.27 kg) per unit. The loudspeaker shall be the Sonance Professional Series PS-C63RT. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C61RT Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
PS-C41RT PS-C61RT Manual (PDF) - Instructions
PS-C41RT PS-C61RT QuickStartGuide (PDF) - Instructions
PS-C6 C-BRACKET & TILE BRIDGE cad file (PDF) - Drawings & Images
PS-C61RT cad file (PDF) - Drawings & Images
PS-C6 C-BRACKET & TILE BRIDGE cad file (DWG) - Drawings & Images
PS-C6 C-BRACKET & TILE BRIDGE cad file (DXF) - Drawings & Images
PS-C61RT cad file (DXF) - Drawings & Images
45166 PS-C61RT SPEAKER cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C61RT EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C61RT Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C63RT

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C63RT in-ceiling speaker features a bezel-less magnetic grille, optional square adapter, high-excursion 6.5" woofer, and pivoting tweeter for precise sound coverage. Its sealed metal enclosure includes cable clamping, a removable Euroblock connector, and seismic attachment. UL 1480 and UL 2043 certifications ensure safety and reliable performance.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	45131 (White)
HF Driver	1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
LF Driver	6.5" (165mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	49Hz-25kHz
Frequency Response (+/- 3db)	65Hz - 20kHz
Power Handling (RMS)	120W program, 60W pink noise
Sensitivity	91dB (2.83V/1m)
Rated Maximum SPL	108dB @ 1 meter (3.3 feet), 116dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 60W, 30W and 15W 70 V: 7.5W
Dimensions (Diameter x D)	9.13" x 8.86" (231.9mm x 225.04mm)
Cut-Out Dimensions (Diameter)	8.25" (209.55mm)
Knockout	One, Side mounted 0.75" (19mm)
Weight	9.38 lbs. (4.25kg)
Grille	One Piece Paintable Grille with Magnetic Retention
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480; UL 2043; NFPA 90A; NFPA 70
Suspension Points	One, on top surface
Maximum SPL (Peak)	116dB peak

Architectural Specifications

Manuals and Documents

PS-C63RT Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
Professional Series In-Ceiling Manual (PDF) - Instructions
Retro Ring In-Ceiling Installation Manual (PDF) - Instructions
PS-Ceiling QuickStartGuidel (PDF) - Instructions
PS-C6 C-BRACKET & TILE BRIDGE cad file (PDF) - Drawings & Images
PS-C63RT cad file (PDF) - Drawings & Images
PS-C6 C-BRACKET & TILE BRIDGE cad file (DWG) - Drawings & Images
PS-C6 C-BRACKET & TILE BRIDGE cad file (DXF) - Drawings & Images
PS-C63RT cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C63RT EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C63RT Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C63RTLP

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C63RTLP in-ceiling speaker has a shallow 4.37" design for tight spaces, a bezel-less magnetic grille, optional square adapter, high-excursion 6.5" woofer, and pivoting tweeter for precise sound. Its sealed metal enclosure includes knock-outs, a removable Euroblock connector, and seismic attachment. It is UL 1480 and UL 2043 certified.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	45182 (White)
HF Driver	1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
LF Driver	6.5" (165mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	49Hz-25kHz
Frequency Response (+/- 3db)	65Hz - 20kHz
Power Handling (RMS)	120W program, 60W pink noise
Sensitivity	91dB (2.83V/1m)
Rated Maximum SPL	108dB @ 1 meter (3.3 feet), 116dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 60W, 30W and 15W 70 V: 7.5W
Dimensions (Diameter x D)	11.06" x 4.37" (280.92mm x 111.0mm)
Cut-Out Dimensions (Diameter)	10.125" (257.18mm)
Knockout	One, Side mounted 0.75" (19mm)
Weight	10 lbs. (4.54kg)
Grille	One Piece Paintable Grille with Magnetic Retention
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480; UL 2043; NFPA 90A; NFPA 70
Suspension Points	One, on top surface
Maximum SPL (Peak)	116dB peak

Architectural Specifications

The loudspeaker shall be of the two way type comprising a single flush mount enclosure containing one 6.5” (165mm) Polypropylene Cone, Butyl Rubber Surround low frequency transducer and one coaxially mounted pivoting 1” (25mm) Cloth dome, Pivoting, Ferrofluid cooled high frequency transducer. It shall utilize a one-piece bezel-less grille design and an optional square grille adapter shall also be available if required. Frequency range shall be 65Hz – 20KHz (-3dB). Total power handling shall be 60 Watts continuous pink noise and 120 Watts program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 65Hz – 20KHz shall be 91dB. The unit shall be supplied with a line matching transformer suitable for 100 volt or 70 volt with a front mounted control allowing user selectable power taps of 60W, 30W, 15W, 7.5W and a 8 Ohm bypass. The back shall be constructed from deep drawn steel. The baffle shall be ported and injection molded using fire rated ABS that meets UL 94V-0. The speaker shall be suitable for use in air handling spaces per UL 1480, UL 2043, NFPA 90 and NFPA 70 S7232 UL Listed signaling speaker. Wire shall be terminated on the rear of the back can with access via the rear or side knock-out. A seismic attachment shall be provided on the rear of the back can to allow additional support when necessary. The system shall include a support backing plate to reinforce the ceiling material and tile support rails which can all be installed from beneath the ceiling tile. External dimensions shall be 11.06” Diameter x 4.37” Depth (281mm x 111mm). The total enclosure shall weigh 5 lbs. (2.27 kg) per unit. The loudspeaker shall be the Sonance Professional Series PS-C63RTLP. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C63RTLP Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
Professional Series In-Ceiling Manual (PDF) - Instructions
Retro Ring In-Ceiling Installation Manual (PDF) - Instructions
PS-Ceiling QuickStartGuidel (PDF) - Instructions
PS-C63RTLP cad file (PDF) - Drawings & Images
PS-C63RTLP cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C63RTLP EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C63RTLP Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C83RT

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C83RT in-ceiling speaker features a bezel-less magnetic grille, optional square adapter, high-excursion 8" woofer, and pivoting tweeter for precise sound. Its sealed metal enclosure includes cable clamping, a removable Euroblock connector, and seismic attachment. UL 1480 and UL 2043 certifications ensure safety and reliable performance.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	45132 (White)
HF Driver	1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
LF Driver	8" (203mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	41Hz-25kHz
Frequency Response (+/- 3db)	55Hz - 20kHz
Power Handling (RMS)	160W program, 80W pink noise
Sensitivity	91dB (2.83V/1m)
Rated Maximum SPL	110dB @ 1 meter (3.3 feet), 116dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 60W, 30W and 15W 70 V: 7.5W
Dimensions (Diameter x D)	11.06" x 9.84" (280.92mm x 249.94mm)
Cut-Out Dimensions (Diameter)	10.125" (257.18mm)
Knockout	One, Side mounted 0.75" (19mm)
Weight	13.41 lbs. (6.08kg)
Grille	One Piece Paintable Grille with Magnetic Retention
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480; UL 2043; NFPA 90A; NFPA 70
Suspension Points	One, on top surface
Maximum SPL (Peak)	116dB peak

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a single flush mount enclosure containing one 8” (203mm) polypropylene cone, butyl rubber surround low frequency transducer and one coaxially mounted 1” (25mm) cloth dome, pivoting, ferrofluid cooled high frequency transducer. It shall utilize a one-piece bezel-less grille design and an optional square grille adapter shall also be available if required. Frequency range shall be 55Hz – 20KHz (-3dB). Total power handling shall be 80 Watts continuous pink noise and 160 Watts program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 55Hz – 20KHz shall be 91dB. The unit shall be supplied with a line matching transformer suitable for 100 volt or 70 volt with a front mounted control allowing user selectable power taps of 60W, 30W, 15W, and 7.5W (70V) and an 8 Ohm bypass. The back shall be constructed from deep drawn steel. The baffle shall be ported and injection molded using fire rated ABS that meets UL 94V-0. The speaker shall be suitable for use in air handling spaces per UL 2043, NFPA 90 and NFPA 70 S7232 as well as UL 1480, UL Rated signaling speaker. Wire shall be terminated in an enclosed area on the rear of the back can with a secondary knock-out. Strain relief shall be provided for wire. A seismic attachment shall be provided on the rear of the back can to allow additional support when necessary. The system shall include a support backing plate to reinforce the ceiling material and tile support rails which can all be installed from beneath the ceiling tile. External dimensions shall be 11.06” Diameter x 9.84” Depth (281mm x 250mm). The total enclosure shall weigh 10 lbs. (4.53 kg) per unit. It shall share consistent voicing with other form factors and sizes within its product family so as to provide continuity of sonic signature when combined within a project. The loudspeaker shall be the Sonance Professional Series PS-C83RT. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C83RT Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
Professional Series In-Ceiling Manual (PDF) - Instructions
Retro Ring In-Ceiling Installation Manual (PDF) - Instructions
PS-Ceiling QuickStartGuidel (PDF) - Instructions
PS-C83RT cad file (PDF) - Drawings & Images
PS-C83RT cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C83RT EASE file (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C83RT Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C83RWT

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The Sonance PS-C83RWT in-ceiling woofer features a bezel-less magnetic grille, optional square adapter, and an ultra-high-excursion 8" woofer for powerful bass. Its sealed metal enclosure includes cable clamping, a removable Euroblock connector, and seismic attachment. UL 1480 and UL 2043 certified, it ensures safety and reliable bass augmentation.

Product Gallery

Features, Specifications, and Manuals

Features

Class-leading sensitivity & sonic performance
Exceptional off-axis response
Heavy duty voice coil for longevity and reliability
Full-fidelity transformer for uncompromised tonality
Consistent voicing across product range
Bezel-less design for clean and minimalistic aesthetic
Optional black grilles in round or square
Magnetic grille retention for fast installation and removal
Finger-adjustable selector tap
One-step simplified painting process

Specifications

Specification	Details
SKU	40133 (White)
LF Driver	8" (203mm) Polypropylene Cone, Butyl Rubber Surround
Frequency Response (+/- 10db)	32Hz – 300Hz
Frequency Response (+/- 3db)	50Hz – 150Hz
Power Handling (RMS)	200W program, 125W pink noise
Sensitivity	89dB (2.83V/1m)
Rated Maximum SPL	110dB @ 1 meter (3.3 feet, 116dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 120W, 60W and 30W 70 V: 15W
Dimensions (Diameter x D)	11.06" x 9.84" (280.92mm x 249.94mm)
Cut-Out Dimensions (Diameter)	10.125" (257.18mm)
Knockout	One, Side mounted 0.75" (19mm)
Weight	14.95 lbs. (6.78kg)
Grille	One Piece Paintable Grille with Magnetic Retention
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480; UL 2043; NFPA 90A; NFPA 70
Suspension Points	One, on top surface
Maximum SPL (Peak)	116dB peak

Architectural Specifications

The loudspeaker shall be of the woofer-type comprising a single flush mount enclosure containing one 8” (203mm) polypropylene cone, butyl rubber surround, ultra-high excursion low frequency transducer. It shall utilize a one-piece bezel-less grille design and an optional square grille adapter shall also be available if required. Frequency range shall be 50Hz – 150Hz (-3dB). Total power handling shall be 200 Watts continuous pink noise and 160 Watts program. Sensitivity measured with 2.83 volts input at 1 meter on axis averaged between 50Hz – 150Hz shall be 89dB. The unit shall be supplied with a line-matching transformer suitable for 100 volt or 70 volt with a front-mounted control allowing user selectable power taps of 120W, 60W, 30W, and 15W (70V) and an 8 Ohm bypass. The back shall be constructed from deep drawn steel. The baffle shall be ported and injection molded using fire rated ABS that meets UL 94V-0. The speaker shall be suitable for use in air handling spaces per UL 2043, NFPA90, NFPA70 and S7232 as well as UL 1480, UL Rated signaling speaker. Wire shall be terminated in an enclosed area on the rear of the back can with a secondary knock-out. Strain relief shall be provided for wire. A seismic attachment shall be provided on the rear of the back can to allow additional support when necessary. The system shall include a support backing plate to reinforce the ceiling material and tile support rails which can all be installed from beneath the ceiling tile. External dimensions shall be 11.06” Diameter x 9.84” Depth (281mm x 250mm). The total enclosure shall weigh 12 lbs. (5.44 kg) per unit. It shall share consistent voicing with other form factors within its product family so as to provide continuity of sonic signature when combined within a project. The loudspeaker shall be the Sonance Professional Series PS-C83RWT. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C83RWT Data Sheet (PDF) - Sales & Data Sheets
Professional Series Sell Sheet (PDF) - Sales & Data Sheets
Professional Series In-Ceiling Manual (PDF) - Instructions
Retro Ring In-Ceiling Installation Manual (PDF) - Instructions
PS-Ceiling QuickStartGuidel (PDF) - Instructions
40133 PS-C83RWT cad file (PDF) - Drawings & Images
40133 PS-C83RWT cad file (DWG) - Drawings & Images
Professional Series In-Ceiling REVIT FILE (ZIP) - Drawings & Images
PS-C83RWT Ease File (GLL) - Ease Files & Speaker Presets
EASE Address Training Materials (ZIP) - Ease Files & Speaker Presets
EASE Address Setup (ZIP) - Ease Files & Speaker Presets
EASE Address (ZIP) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C83RWT Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C85BB

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The PS-C85BB is the matching back box for the PS-C85RTBF loudspeaker baffle. Constructed from powder coated steel and UL listed for plenum-rated installations

Product Gallery

Features, Specifications, and Manuals

Features

Pre-install Backcan
Part of a complete High Output form factor family
Requires PS-C85RTBF baffle (sold separately)

Specifications

Specification	Details
SKU	40232 (Black - RAL 7021)
Enclosure	Powder Coated Steel
Dimensions (Diameter x D)	14.17" x 10.43" (359.92mm x 264.92mm)
Weight	12.15 lbs. (5.51kg)
Certifications	UL 1480A; UL 2043; NFPA 90A; NFPA 70

Manuals and Documents

PS-C85RTBF PS-C85BB Baffle High Output In-Ceiling Data Sheet (PDF) - Sales & Data Sheets
High Output Professional Sell Sheet (PDF) - Sales & Data Sheets
PS-C85RTBF BB Manual (PDF) - Instructions
PS-C85RTBF BB QuickStartGuide (PDF) - Instructions
PS-C85 C-BRACKET & TILE BRIDGE cad file (PDF) - Drawings & Images
PS-C85BB cad file (JPG) - Drawings & Images
PS-C85BB cad file (DXF) - Drawings & Images
PS-C85 C-BRACKET & TILE BRIDGE cad file (DXF) - Drawings & Images
Sonance PS-C85BB Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C85RT

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The PS-C85RT is a high-output in-ceiling loudspeaker engineered for demanding commercial environments. Featuring an 8" aluminum cone woofer, 1.4" neodymium compression driver, and selectable horn or collar dispersion, it delivers 93dB sensitivity and up to 117dB SPL with full 70V/100V distributed audio compatibility. Explore the full high-output family here.

Product Gallery

Features, Specifications, and Manuals

Features

Field-selectable 120° or 80° dispersion coverage
Horn and collar assembly ships in-box; field-adjustable
1.4" compression driver engineered for high-SPL commercial environments
Extended low-frequency response
Integrated 70V/100V transformer, 120W max tap
Part of a complete High Output form factor family

Specifications

Specification	Details
SKU	40229
HF Driver	1.4" (36mm) aluminum dome compression driver, 36mm Voice Coil Size, 1" (25mm) Exit Size, Neodymium Magnet, 1500Hz Crossover Frequency
LF Driver	8" (203mm) aluminum cone, Santoprene surround, 60.55mm Voice Coil Size, Ferrite Magnet
Frequency Response (+/- 10db)	39.8Hz - 25kHz
Frequency Response (+/- 3db)	53.3Hz - 20kHz
Power Handling (RMS)	150 watts (600 watts peak), 100 hours
Sensitivity	93dB SPL
Enclosure	PC/ABS (UL94V-0), Steel, Powder coated
Rated Maximum SPL	112dB, 118dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 120W, 60W and 30W 70 V: 15W
Coverage Pattern 1kHz to 10kHz	120 or 80 Degree Axis Symmetric
Dimensions (Diameter x D)	13.27" x 10.8" (337.06mm x 274.32mm)
Cut-Out Dimensions (Diameter)	11.625" (295.28mm)
Weight	26.04 lbs. (11.81kg)
Grille	Steel
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480A, UL 2043, NFPA 90A, NFPA 70
Suspension Points	Two, on top surface
Maximum SPL (Peak)	118dB peak

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a single flush mount in-ceiling enclosure containing one 8” (203mm) aluminum cone, santoprene surround low frequency transducer with ferrite magnet and 60.55mm voice coil, and one 1.4” (36mm) coaxially mounted aluminum dome compression driver high frequency transducer with neodymium magnet, 36mm voice coil, and 1” (25mm) exit with 1500Hz crossover frequency. It shall feature interchangeable collar and horn directivity options for flexible coverage patterns. Frequency range shall be 53.3Hz – 20KHz (+/-3dB). Long term power handling shall be 150 Watts continuous (600 Watts Peak) for 100 hours per IEC standards, with program power of 300 Watts (1200 Watts Peak) for two hours. The unit shall be supplied with a laminated core line matching transformer suitable for 100 volt or 70 volt with control allowing user selectable power taps of 120W, 60W, 30W, and 15W (70V), 120W, 60W, and 30W (100V), and an 8 ohm bypass. The enclosure shall be constructed from powder coated steel with ABS plastic (UL94V-0) baffle suitable for indoor applications. The grille shall be constructed from steel with round or square trim options. The speaker shall be suitable for commercial installation per UL 1480A, UL 2043, NFPA 90A, and NFPA 70 standards for use in air handling spaces. Wire shall be terminated via four pin Euroblock connector with loop output connections. Two suspension points shall be provided on the top surface to allow additional support when necessary. The enclosure cubic volume shall be 0.48 cubic feet (13.5 cubic liters) with port tuning at 54.6Hz. The system shall include support components for installation with capture thickness capability from 0” to 2.12” (0mm to 53.84mm). Coverage pattern from 1kHz to 10kHz shall be 120 degrees axis symmetric (collar configuration) or 80 degrees axis symmetric (horn configuration) with directivity factor (Q) of 5.7 (collar) or 8.65 (horn) averaged from 1kHz to 16kHz and directivity (DI) of 7.5dB (collar) or 9dB (horn) averaged from 1kHz to 16kHz. Operating temperature range shall be -40°F to 140°F (-40°C to 60°C). External dimensions shall be 13.27” Diameter x 10.82” Depth (337mm x 274.8mm) with mounting depth of 10.7” (271.8mm) and cut out dimension of 11.625” diameter (296mm). Round trimless grille diameter shall be 13.32” (338.4mm) with optional square trimless grille of 13.38” x 13.38” (339.8mm x 339.8mm). The total enclosure shall weigh 26.04 lbs. (11.81 kg) per unit with grille. It shall have fire-rated engineering and accurate sonic performance to deliver both good intelligibility and musicality suitable for commercial ceiling installations. The loudspeaker shall be the Sonance Professional Series PS-C85RT. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C85RT High Output In-Ceiling Data Sheet (PDF) - Sales & Data Sheets
High Output Professional Sell Sheet (PDF) - Sales & Data Sheets
PSHighOutput In-Ceiling Manual (PDF) - Instructions
PS-C85RT QuickStartGuide (PDF) - Instructions
PS-C85RT Round Flex Bracket QuickStart Guide (PDF) - Instructions
PS-C85RT cad file (PDF) - Drawings & Images
PS-C85RT square adapter cad file (PDF) - Drawings & Images
PS-C85RT cad file (DXF) - Drawings & Images
PS-C85RT square adapter cad file (DXF) - Drawings & Images
PS-C85RT-WIDE EASE file (GLL) - Ease Files & Speaker Presets
PS-C85RT-NARROW EASE file (GLL) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C85RT Product Page - Official manufacturer product information, documentation, and support resources.

Sonance PS-C85RTBF

Wed, 23 Sep 2026 00:00:00 +0000

Introduction

The PS-C85RTBF is the baffle-only configuration of the Professional Series high-output in-ceiling loudspeaker, designed for use with the PS-C85BB back box. Delivers 91dB sensitivity and extended low-frequency response, with selectable horn or collar dispersion and full 70V/100V distributed audio support. Explore the full high-output family here.

Product Gallery

Features, Specifications, and Manuals

Features

Field-selectable 120° or 80° dispersion coverage
Horn and collar assembly ships in-box; field-adjustable
1.4" compression driver engineered for high-SPL commercial environments
Extended low-frequency response
Integrated 70V/100V transformer, 120W max tap
Part of a complete High Output form factor family
Requires PS-C85BB back box (sold separately)

Specifications

Specification	Details
SKU	40231
HF Driver	1.4" (36mm) aluminum dome compression driver, 36mm Voice Coil Size, 1" (25mm) Exit Size, Neodymium Magnet, 1500Hz Crossover Frequency
LF Driver	8" (203mm) aluminum cone, Santoprene surround, 60.55mm Voice Coil Size, Ferrite Magnet
Frequency Response (+/- 10db)	36.6Hz - 25kHz
Frequency Response (+/- 3db)	41.4Hz - 20kHz
Power Handling (RMS)	150 watts (600 watts peak), 100 hours
Sensitivity	91dB SPL
Enclosure	PC/ABS (UL94V-0), Steel, Powder coated (sold seperately)
Rated Maximum SPL	114dB, 120dB peak
Nominal Impedance (Ohms)	8 ohms
Transformer Taps	70 V / 100 V: 120W, 60W and 30W 70 V: 15W
Coverage Pattern 1kHz to 10kHz	120 or 80 Degree Axis Symmetric
Dimensions (Diameter x D)	11.07" x 7.22" (281.18mm x 183.39mm)
Cut-Out Dimensions (Diameter)	10.125" (257.18mm)
Weight	18.7 lbs. (8.48kg)
Grille	Steel
Input Connector	Four pin, Euroblock with loop output connections
Certifications	UL 1480A; UL 2043; NFPA 90A; NFPA 70
Suspension Points	Two, on top surface
Maximum SPL (Peak)	120dB peak

Architectural Specifications

The loudspeaker shall be of the two-way type comprising a baffle-only configuration for flush mount in-ceiling installation containing one 8” (203mm) aluminum cone, santoprene surround low frequency transducer with ferrite magnet and 60.55mm voice coil, and one 1.4” (36mm) coaxially mounted aluminum dome compression driver high frequency transducer with neodymium magnet, 36mm voice coil, and 1” (25mm) exit with 1500Hz crossover frequency. It shall feature interchangeable collar and horn directivity options for flexible coverage patterns. Frequency range shall be 41.4Hz – 20KHz (+/-3dB). Long term power handling shall be 150 Watts continuous (600 Watts Peak) for 100 hours per IEC standards, with program power of 300 Watts (1200 Watts Peak) for two hours. The unit shall be supplied with a laminated core line matching transformer suitable for 100 volt or 70 volt with control allowing user selectable power taps of 120W, 60W, 30W, and 15W (70V), 120W, 60W, and 30W (100V), and an 8 ohm bypass. The baffle shall be constructed from ABS plastic (UL94V-0) suitable for indoor applications with separate powder coated steel back box enclosure (sold separately). The grille shall be constructed from steel with round or square trim options. The speaker shall be suitable for commercial installation per UL1480A, UL 2043, NFPA 90A, and NFPA 70 standards for use in air handling spaces. Wire shall be terminated via gold plated push terminals. The back box enclosure cubic volume shall be 0.83 cubic feet (23.5 cubic liters) with port tuning at 41.1Hz when used with compatible enclosure. The system shall include support components for installation with capture thickness capability from 0” to 2.12” (0mm to 53.84mm). Coverage pattern from 1kHz to 10kHz shall be 120 degrees axis symmetric (collar configuration) or 80 degrees axis symmetric (horn configuration) with directivity factor (Q) of 5.7 (collar) or 8.65 (horn) averaged from 1kHz to 16kHz and directivity (DI) of 7.5dB (collar) or 9dB (horn) averaged from 1kHz to 16kHz. Operating temperature range shall be -40°F to 140°F (-40°C to 60°C). External dimensions shall be 11.07” Diameter x 7.22” Depth (281.1mm x 184.4mm) with mounting depth of 7.14” (181.4mm) and cut out dimension of 10.125” diameter (257mm). Round trimless grille diameter shall be 11.17” (283.8mm) with optional square trimless grille of 11.18” x 11.18” (284mm x 284mm). The baffle shall weigh 18.7 lbs. (8.48 kg) per unit with grille. It shall have fire-rated engineering and accurate sonic performance to deliver both good intelligibility and musicality with extended low frequency response when used with appropriate back box enclosure suitable for commercial ceiling installations. The loudspeaker shall be the Sonance Professional Series PS-C85RTBF. No other system shall be acceptable unless the above combined performance specifications are equaled or exceeded.

Manuals and Documents

PS-C85RTBF PS-C85BB Baffle High Output In-Ceiling Data Sheet (PDF) - Sales & Data Sheets
High Output Professional Sell Sheet (PDF) - Sales & Data Sheets
PS-C85RTBF BB Manual (PDF) - Instructions
PS-C85RTBF BB QuickStartGuide (PDF) - Instructions
PS-C85RTBF cad file (PDF) - Drawings & Images
PS-C85RTBF square adapter cad file (PDF) - Drawings & Images
PS-C85 C-BRACKET & TILE BRIDGE cad file (PDF) - Drawings & Images
PS-C85RTBF cad file (DXF) - Drawings & Images
PS-C85RTBF square adapter cad file (DXF) - Drawings & Images
PS-C85 C-BRACKET & TILE BRIDGE cad file (DXF) - Drawings & Images
PS-C85BB cad file (JPG) - Drawings & Images
PS-C85BB cad file (DXF) - Drawings & Images
PS-C85RTBF-WIDE EASE file (GLL) - Ease Files & Speaker Presets
PS-C85RTBF-NARROW EASE file (GLL) - Ease Files & Speaker Presets
Sonance DSP Speaker Presets Sonance DSP SpeakerPresets 2026.08.03 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect Speaker Preset Library BlazebySonance SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
PowerZone Connect PRO Speaker Preset Library SpeakerPresets 20260819.1 (ZIP) - Ease Files & Speaker Presets
Sonance PS-C85RTBF Product Page - Official manufacturer product information, documentation, and support resources.